I. Cross knot

1, one end is knotted and the other end is punched in turn;

2. Jump into a hole;

3. fasten it in the same way;

4. After repeating, insert the remaining shoelaces into the inside and tie them;

5, purple shoelaces are also punched in order;

6. Wear it from below and then from above;

7. Choose a harmonious shoelace according to the color of the shoes;

8. Extra shoelaces are knotted inside.

Second, trapezoidal knot

1, after adjusting the length of both ends of the shoelace, pull the shoelace from the inside out;

2. Pull out the shoelace and thread it into the second hole from outside to inside;

3. The shoelace on the left goes out from under the shoelace between the two holes on the right, and it is similar on the right;

4. Repeat the operation;

5. Pay attention to the direction of crossing shoelaces at both ends;

6. Extra shoelaces are stuffed into shoes and knotted;

7. Finished trapezoidal knot.

Third, kink

1, two shoelaces are tied inside and released;

2. Two shoelaces cross through the second hole;

3. At this time, in order to center the intersection as much as possible, tighten the shoelaces;

4. The appearance of distortion is produced in the process of intersection pair;

5. An enlarged view of the kink;

6. Leave the last hole;

7. Finally, it is treated with X Ming Kai, which is more convenient to put on and take off;

8. The remaining shoelaces are tied together in the shoes.

Fourth, double X junction.

1, starting from the second hole and passing through the shoelace from outside to inside;

2. First use the X-knot method to make white shoelaces;

3, white X knot;

4. Knot the end inward;

5. As shown in the figure, the blue shoelace passes through the first hole, making an X knot and passing through the intersection of the white shoelace;

6. Tie the end of the blue shoelace;

7. The remaining lines are relatively long and can be made into a circle;

8. Run a few laps and cross the ring.

Five, double straight knot

1, leave a certain length of yellow shoelaces, then go out from the left and go in from the right;

2. Tie your shoelaces in the direction of the dotted line;

3. Adjust the shoelaces to keep them straight and don't roll them up;

4, the excess part is stuffed into the shoe;

5. Similarly, after leaving a white shoelace on the inside, tie a yellow shoelace on the inside;

6. Tie your shoelaces in the direction of the dotted line;

7. Adjust the white shoelace so that it is above the yellow shoelace;

8. The extra part is tied with the yellow shoelace on the inside of the shoe.

Six, diagonal knot

1. Tie a single knot inside after passing through the first hole, and the other end passes through the third hole on the left from inside to outside;

2. The shoelace passes through the second hole on the right;

3. Complete the diagonal knot with blue shoelaces;

4. Tie a diagonal knot with a white shoelace in the opposite direction;

5, the method is the same as the blue shoelaces;

6. The blue and white shoelaces finally came out of the hole in the tongue;

7. From the way the tongue wears;

8. It looks better if you tie it loosely.

Seven, internal X junction

1. After the two ends are consistent, the two ends respectively pass through the second hole;

2. Pass through the (1) hole, enter the (2) hole and then pass through the (3) hole;

3. Repeat step (1) (2) and (3) (as shown in the figure);

4. The length of things needs to be 90-95CM, and finally the length as shown in the figure is left;

5. tie a knot on the inside;

6. finished product style.