After all, the bright strips of the window are glued, not welded or fixed with screws. It is normal to tilt up after a long time. That's bright. What shall I use to glue the window?

It is also good to stick the window bright strip with 40 1 or 80 1 glue or 3M double-sided adhesive tape.

The installation method of window bright strip is as follows:

First, clean the place to be pasted with car cleaner or alcohol.

After determining the installation position, tear off the 3M glue of the two products for about 3cm, but be careful that the glue surface and fingers do not touch each other.

Stick the bright strip in the aligned position, and then slowly tear off the red tape on both sides.

Finally, to ensure that the window bright strips are firmly pasted, you need to press them back and forth with a towel.