Sometimes when we buy a cup, there will be some stickers on the cup, which will affect our use to a certain extent, so we will need to remove the glue on the cup. So, what about the glue on the cup? How to remove glue? What are some useful methods? Now the editor will introduce to you several practical methods to remove glue on cups, and provide you with several simple operations for removal. Which one is suitable for consumers? You can refer to the editor’s introduction. I hope the editor’s introduction can help everyone.

How to remove the glue on the cup

1. Completely saturate the area with the sticker with essential oil, and wipe it off with a dry rag after 15 minutes. If the dirt is difficult to remove, you can extend the soaking time of the wind oil essence, and then rub it vigorously until it is clean.

2. Turn on the hair dryer to maximum heat, blow on the tape mark for a while, let it slowly soften, and then use a harder eraser or soft rag to easily wipe off the offset.< /p>

Scope of application: This method is suitable for items with relatively small tape marks and long offset printing time, but the items must have sufficient heat resistance.

3. Dip a dry dishcloth into white vinegar or vinegar, completely cover the area with the label, and make it completely soaked. After soaking for 15-20 minutes, use a dishcloth to gradually wipe it off along the edge of the sticker.

4. Use oil! It’s actually very simple. I saw many answers, gasoline, alcohol, etc., no oil is better! Spread the word, this method can help many people solve the problem of self-adhesive stickers!

Method: Tear off as much as you can. If you can’t tear it off, the glue will be exposed. Use ordinary cooking oil to drip on it, and wipe it gently with a cloth or dry toilet paper. Hahaha, no traces will be left! What better than that? Steel balls and scouring pads are a hundred times stronger, and the most important thing is that they leave no traces.

5. Alcohol removal method: dip a soft cloth or the like into a sufficient amount of 95% alcohol, and then wipe it gently without leaving any traces. When the adhesive dries, the adhesive will easily soften and come off. At the same time, alcohol will generally not cause any damage to the surface of plastic parts or car paint.

6. Gasoline removal method: Use a soft cloth dipped in a little gasoline to gently wipe the adhesive area. At this time, you should be careful because gasoline has a "dissolving" effect on certain plastics or paints. use. First rub it on an unimportant place and observe it. If there is no problem, use it. But be careful not to use too much gasoline, and the time should be as short as possible!

7. Hand cream removal method: Hand cream contains a large amount of water (generally above 70%), and water contains a certain amount of water. of surfactants. Surfactants have good wetting, penetrating, and dissolving abilities, and can quickly penetrate between the sticker and the surface of the object to achieve the purpose of removal.

8. Eraser removal method: Use a hair dryer to heat the tape traces, and then apply it with an eraser and it will be very clean.

Above, the editor introduced to you how to remove the glue on the cup, mainly introducing eight commonly used methods to effectively remove the glue on the cup. These methods are all effective methods tested by many people. , if consumers have the same trouble, they can refer to the method given by the editor, and then remove it by themselves. Pay attention to be more careful when using some liquids, so as not to dirty the surrounding environment. I hope that the editor will Introduction can help everyone.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design plans" for free, as well as decoration avoidance strategies! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, and you can get it for free~