Hello

1. Preparation materials

First of all, find a laundry detergent bucket, clean all the remaining laundry detergent inside, and at the same time clean the surface. The trademark is also torn off. If it is difficult to tear off, you can use a hair dryer to blow it off, which will make it much easier to tear off. When you see this lotion bucket, you should have a rough pattern in your mind. If you have drawing skills, you can draw it directly on the bucket. If not, you can find a background and trace a beautiful picture on it, or you can print it out directly.

2. Engraving pattern

After preparing the pattern, use double-sided tape to stick it on the laundry detergent bucket, but don’t stick it too much, otherwise some will be left on it. Glue, just glue down a few main places. Next, use scissors to cut out according to the outline of the pattern. However, scissors can only cut a rough shape. As for the details, you need to use a wallpaper cutter. You can also buy a set of engraving knives, which are not expensive. If you need to drill holes, use an awl or an electric drill.

3. Attach decorations

If you want to make it three-dimensional, you can buy a hot melt glue gun, make the cut plastic into the shape of petals, and then add another layer Glue it on layer by layer, and finally glue the prepared decorations on, so that you can make a more beautiful and three-dimensional flower pot. Seeing these various three-dimensional flower pots is like a piece of art placed there, a hundred times more beautiful than ordinary flower pots.

Be careful during the production process. After all, there will be some sharp edges during the cutting process. If you are worried that you will be pricked, you can use a lighter to bake them after cutting. At the same time, Pay attention to drilling a few holes at the bottom of the pot so that water can permeate. Finally, you can put an appropriate amount of soil inside and plant your favorite flowers inside.