The hot stamping work is mainly responsible for the hot stamping of some words and lines such as trademarks, logos and patterns. Of course, there is also hot stamping on the uppers, indentations and graphics on the soles, etc.

An ironer refers to a professional who presses and irons clothing after the production is completed to make the clothing fit and neat.

1. Be familiar with the performance of ironing machines and electric irons, and master their operation methods and ironing methods.

2. Responsible for the ironing work of various garments.

3. Be familiar with various garment inspection standards.

4. Keep the ironing table and surrounding environment clean and orderly.

Overall shoemaking process:

1. Material procurement

Purchasing will contact the manufacturer based on the color card of the confirmation sample and ask them to confirm whether they can produce the material. If You can place an order immediately.

2. Cutting?

1. Knife tube: Responsible for receiving cardboard cutting molds from the development department and managing all molds.

2. Blanking: divided into large punching and small punching. Big punching: several pieces of materials can be cut together, mainly punching leather materials, linings and accessories. Small punching: cannot be cut together, mainly punching leather materials.

3. Inspection: Count and inspect the punched out materials.

4. Draw lines and trim edges.

5. Ingredients: Responsible for matching materials to avoid color difference.

3. Sewing uppers

Different styles of shoes have different sewing processes, but they have the following similarities:

1. First, sew the head and sides, sew the sides and back, and sew the head and sides.

2. Subsidize and strengthen. Generally, slices, hot melt glue or Furong cloth are used for reinforcement.

3. Wrap the tongue with sponge and order the tongue.

4. The fabric should be flattened if there are any reverse connections.

5. Sew the upper from the inside to the outside.

6. Paste the back lining and wrap the back sponge.

7. Non-waterproof shoes: only in the back of the car. Waterproof shoes: tongue lining, back top lining and waterproof lining are required.

8. Punch holes and press shoe buckles.