Current location - Trademark Inquiry Complete Network - Trademark registration - How to remove the trademark glue on the plastic box?
How to remove the trademark glue on the plastic box?

The method is as follows:

1. Along the edge of the trademark, tear off most of the paper on the label, and the remaining glue will stick to the plastic.

2. Take a piece of rubber and rub it back and forth on the adhesive backing of the trademark.

3. After rubbing for a period of time, the adhesive and rubber scraps will stick together to form a strip, which can be easily removed.

4. Repeat step 3 for about 5-10 minutes (the time will be longer depending on the adhesive area), and the trademarked adhesive on the plastic box will be removed.

Extended information

Introduction to other treatment methods

1. Lemon juice?

If you accidentally get the sticker on your skin It will feel very uncomfortable. At this time, you can use lemon juice to clear it. 2. Hair dryer

For the self-adhesive on plastic products, you can use the hot setting of the hair dryer to heat the self-adhesive, and then slowly tear it off. Blow the label with hot air from a hair dryer, but keep a certain distance and do not continue to blow for too long. When the label is slightly hot when you touch it with your hands, you can use your fingernails or tweezers to try to lift it up from the corners of the label. 3. Hand cream

Hand cream can also achieve the effect of removing stickers, because hand cream contains a certain amount of surfactants. This surfactant has good wetting, penetrating and dissolving abilities, and can quickly penetrate between the sticker and the surface of the object to achieve the purpose of removal. Some similar products, such as facial creams, facial cleansers and dishwashing detergents can also be effective. 4. Alcohol removal method

When the above methods are not obvious, we can use alcohol. As soon as alcohol is used, you will immediately see the sticker slowly softening and dissolving. . Gently peel it off with your hands, and the sticker will cleanly leave the object.