The wall-mounted bathroom heater works very well when we use it at home. It has enough heat and the experience of using it is also very good. When choosing, you also need to be careful about its brand. Understand, so that it can meet our needs. Now we will introduce to you, which brand of wall-mounted bathroom heater is better? This way we can choose good products in time.
1. Which brand of wall-mounted bathroom heater is better?
1. You must understand what a wall-mounted bathroom heater is. The wall-mounted bathroom heater is named after its installation method. It is also important to understand it in time and take the following measures during installation. It is fixed on the wall by hanging diagonally, and the installation is simple and convenient. The heating method is mainly bulb heating, with various styles, including single lamp heating, two lamp heating, three lamp heating, and four lamp heating. The functions are divided into two types: lamp heating and lamp heating plus air heating. It is suitable for small area heating, installation without ceiling, free heating, etc. It can adjust the heat. It is a new type of bathroom appliance.
2. The well-known Aupu wall-mounted bathroom heater is worthy of our choice. Aupu ranked first in the bathroom heater brand rankings in 2011. It is a famous brand in Zhejiang Province and a well-known brand in my country. Trademark, mainly produces sanitary ware electrical products, is quite famous in my country's sanitary ware market, and is deeply loved and favored by consumers.
3. The quality is very good. Baolan wall-mounted bathroom heater is also a big brand in the industry. With its unique innovative series, it is loved by the majority of consumers and has successfully opened up the Chinese market, mainly Aiming at the sales of high-end products and high-end consumption, it ranks second in the bathroom heater market.
2. How to install the wall-mounted bathroom heater
1. First of all, because this high-power electrical appliance is installed in the humid environment of the bathroom, it is necessary to understand these in time, so it is necessary to install them. The leakage protector is installed on the strong current box and connected out. The cable box that comes with the machine is actually a wire-controlled control panel without a power supply. The power supply is directly connected to the power supply of the bathroom heater on the ceiling. If you directly connect the power cord to the power supply of the bathroom heater, it will work, but the power is always on, and it is always on standby when not in use, otherwise it cannot be turned off.
2. Secondly, you need to install a switch to control the power supply of the wall-mounted bathroom heater. You must understand that, and for safety, the switch must be installed outside the bathroom. According to the requirements in the manual, the switch in question must be a "bipolar switch." "Bipolar" is a switch that can cut off the live and neutral wires at the same time. Usually, we usually use "single-pole" switches in home decoration, which are switches that only cut off the live wire. The "double-link" and "dual-control" mentioned earlier are generally single-pole switches.
3. Finally, the wall-mounted bathroom heater is very heavy, weighing almost 17 kilograms. As we all know, it is never allowed to be installed on the gusset plate of the ceiling (it cannot bear it at all). It is not recommended to use light steel keels. The instructions recommend the use of wooden keels that can bear a load of 42 kilograms. Because the wall-mounted bathroom heater has high power, it is required that there be no flammable materials within 10cm. Pay special attention to the wire pipes, exhaust pipes, etc. on the ceiling. You also need to calculate the distribution of circuits. For example, like our home, it must be enough to install two such bathroom heaters and an electric water heater.
The brand of wall-mounted bathroom heater is introduced by the editor, so that when we choose, we can understand it clearly and ensure our use needs.