Tools/raw material glue, an art knife, a pencil, several colored papers, and a ruler Steps/Methods Mark lines .5-1cm wide on the edge of the colored paper with a ruler, which will be used as the scale for cutting paper at the back.

press the ruler firmly, and then use the paper cutter to cut the paper, so as to cut out paper strips with a length of 15-2cm. First take out a piece of paper, then roll it into a tight roll, stick the edge of the paper roll with white glue, and wait for it to dry.

tip: at this time, you can also use a toothpick to roll, and then carefully take the rolled tight roll off the toothpick. In this way, 6 tight rolls are always made.

repeat steps 1-3, and then gently flatten one end of the paper roll by hand, thus getting a teardrop-shaped roll. According to five teardrop-shaped paper rolls, a paper flower is formed, and the teardrop rolls can make four flowers in total.

Two flowers and 24 tight rolls are used as one face of the pen container, while only six tight rolls are needed on the other adjacent face of the pen container. All parts are glued together.

according to the above idea, after all the paper rolls are combined, you can get a pen holder for spreading paper. However, it is a pity that the bottom of the pen container is not sealed. If you want to seal it, you can make a few paper flowers to stick together to achieve the effect of sealing the bottom mouth.

do you know? In the early 2th century, porcelain painters in Jingdezhen, Jiangxi Province reformed the traditional pastel painting method and used pastel raw materials to draw Chinese paintings on porcelain, forming a famous school of porcelain painting represented by "Eight Friends of Zhushan".

25 words for writing a pen container

[25 words for writing a pen container] On Sunday, after I finished my homework, I saw all kinds of pens lying everywhere on my desk, which looked like a mess. I made 25 words for writing a pen container. Suddenly my eyes lit up. Make a pen container and put them away! I prepared an empty plastic bottle, a piece of white paper, a pair of scissors, glue, a red cardboard and a watercolor pen. I started to do it. I first cut off the plastic bottle mouth and put it aside. Then I drew a love on the red cardboard, cut it off with scissors and stuck it on the white paper. Then I drew some patterns in the heart-shaped blank with a watercolor pen. Finally, I stuck the pattern paper on the bottle body with glue, and scissors cut off the excess parts. One. The composition of the second grade of primary school is "Making a Pen Container with 25 Words". Looking at the finished pen container, I think that the pen has a place to put and the desk can become neat. I smiled happily. Grade one and grade two, Panzhihua City, Panzhihua East District, Sichuan Province: Little Lilac.

How to make a pen container

This pen container is a little complicated, but it is definitely pleasing to the eye. Let's teach you how to make it in a few minutes today.

Tools/raw material glue, an art knife, a pencil, several colored papers, and a ruler Step/Method Mark a line with a width of .5-1cm on the edge of the colored paper with a ruler, which will be used as a scale for cutting paper at the back. Press the ruler firmly, and then use the paper cutter to cut the paper, and cut out a piece of paper with a length of 15-2cm.

first take out a piece of paper, then roll it into a tight roll, stick the edge of the paper roll with white glue, and wait for it to dry. Tip: at this time, you can also use a toothpick to roll, and then carefully take the rolled tight roll off the toothpick.

in this way, a total of 6 tight rolls are made. Repeat steps 1-3, and then gently flatten one end of the paper roll by hand, thus getting a teardrop-shaped roll.

five teardrop-shaped paper rolls are used as a unit to form a paper flower, and the teardrop rolls can make four flowers in total. Two flowers and 24 tight rolls are used as one side of the pen container, while only six tight rolls are needed on the other adjacent side of the pen container.

all parts are glued together. According to the above idea, after all the paper rolls are combined, you can get a pen holder for spreading paper.

Unfortunately, the bottom of the pen container is not sealed. If you want to seal it, you can make some paper-printed flowers to seal the bottom.

How to make a pen container by hand (picture)

Preparation materials: used paper container, glue and colored paper.

1. First, we found several paper tubes with different heights and sizes, as shown in the figure below. 2, and then find a few pieces of colored paper, according to their favorite colors to choose and match, as shown in the figure below.

3, and then use glue to paint on the colored paper along one edge, without too much glue. 4. Then put the paper tube on the colored paper and roll it up from the beginning, as shown in the figure below.

5. After it is rolled up, fix the joint of colored paper with glue again, as shown in the figure below. 6. Finally, the favorite group is decorated on the paper tube. If you want to make a combined pen tube first, you can fix three paper rolling tubes together, as shown in the figure.

。

How to make a beautiful handmade pen container? Make it with cardboard.

Point 1: Prepare a clean short coke bottle, plaid cloth, lace, hot melt adhesive, scissors, needle and thread, and screwdriver.

It is worth noting that the short coke bottle is selected because the high coke bottle has a high center of gravity and is easy to fall down. If it is hung on the wall, it can be used, as long as it is suitable for the length of the stored items. Point 2: Remove the upper part of the coke bottle with a knife and start cutting at .5-1cm on the label paper.

use a screwdriver or other tools to make evenly spaced holes at the edge above the label paper. Here is a simple way to teach you. It will be faster to make small holes by heating metal chopsticks with hot sol, but be careful not to burn your hands.

Point 3: cut the plaid cloth, the width of the cloth and the length of the cut part are 1cm, and the width is 1cm longer than the circumference of the coke bottle. Fold the long edge of the plaid fabric far from the bottle body, fix the position with a pin and sew the edge to make the hemp rope groove with elastic opening.

Point 4: sew the plaid cloth on the coke bottle, and the needle will pass through the small hole made in the second step, and sew several needles tightly to make the coke bottle bear more weight. After sewing the cloth on the coke bottle, remember to sew the joint of the short side of the cloth.

Point 5: cut the lace to the length as long as the circumference of the coke bottle, and stick the lace to the joint between the cloth and the bottle with hot melt adhesive to hide the stitch of needle and thread and beautify the appearance of the pen container. After pasting the lace, wait for the hot melt adhesive to dry a little before proceeding to the next step.

Point 6: put the pen in the pen container for a test, then put a small hemp rope on the hemp rope groove made in the fourth step to make an elastic opening, and tie the elastic opening tightly to prevent dust from falling in. Hemp rope makes the British flavor more rich.

If you have friends in need, you can also put a lanyard on the pen container, which is more convenient to hang on the wall. Making a simple cute and sturdy pen container will not be troublesome to replace when it is dirty. Flexible use of common waste products at home will make our life more environmentally friendly and low-carbon.

besides pens, you can also put other decorations to decorate your home. Of course, the decorations should not be too heavy. A single small pen container is often not enough for many writers. For families with children at home, a single pen container is also not enough. You may wish to make a practical and beautiful combination pen container yourself.

The more complicated the manufacturing process, the better

Manufacturing method:

1. Paperboard is cut according to size: 2*15CM is made into a pen container, and a pen container bottom is fixed with transparent tape, so I chose to use a toothpaste box directly instead.

2, 9.5CM+8.6CM+9.5CM+8.6CM is the width and 4.1CM is the height. Make two drawers by combining transparent tape and adding the bottom.

3, 5.6CM+1CM+1CM+1CM+5.6CM is the width and 1CM is the height, which are combined into the main body with transparent tape and stuffed into "back" cardboard.

4. according to the main size, make two "drawer partitions", fold them inward into an n shape, and fix them with white glue on the sides.

5, 8CM+8CM is the width and 13CM is the height, and the position where the pen container can be inserted is cut out.

6. Stick a piece of cardboard on the bottom of the main body to make the thickness consistent. First stick the wrapping paper on the periphery of the main body, cut it at the corner, stick it inward to cover the inner wall of the main body, cut four corners, stick the side edge inward first, then stick it before and after, and stick the top properly in the same way.

7. Cut a square wrapping paper and stick it on the top of the main body, cut the center with a knife, stick it inside in sequence, and then stick it on the bottom.

8. The roof, drawer and pen container are pasted with wrapping paper respectively.

9. Drill two small holes with a spacing of 1.6CM in the front of the drawer, take three beads and thread them into the iron wire, then thread them into the drawer from the front, fold them inward in the drawer and fix them with adhesive tape.

1. Fix the roof on the top of the main body with double-sided tape, fix the pen container in the recess with double-sided tape, and stuff it into the drawer.

how to make a beautiful pen container by yourself? /？

You can use a tissue paper tube, wrap it with some beautiful wrapping paper or stick it with beautiful flower cloth, or cut some small petals with colored paper and stick them on it, or make some bows with flower cloth, or make patterns you like, you can also cut off half of it with a beverage bottle, or cut off half of it with a can, or cut off half of it with a knife and then use colored paper. Or wrapping paper or beautiful flowered cloth such as paper towel tube. There are many beautiful flowered cloths in Taobao, and colored paper stationery stores sell them. You can also buy some special paper to make special lines. For example, if you want to be more beautiful, you can go to Taobao to buy Japanese Chiyo paper, which is super expensive but super beautiful. General tools: scissors, glue, white latex, and if necessary, you can decorate some pigments, or stick some beads or beads. It feels shiny because there are too many patterns.

steps of making pen container

empty and clean can bottle (28 ounces)

drawing paper (12*18 inches)

scissors

small piece of white paper

colored marker pen

glue stick

class photo

colored handmade tape

2# wire.

2. Cut a small piece of white paper, write your blessing on it, and paste it on the previously cut picture paper (close to the middle position).

3. Cut the class photos and paste them on the drawing paper at random. Draw some flowers beside each photo with a colored marker, and then draw roots and leaves. Wrap the finished drawing paper on the can and stick the edge with a glue stick.

4. Stick colored tape on the top and bottom of the can bottle.

5. Roll the metal wire into a whirlpool, cut a 3*5 inch picture paper, wrap the postcard with it, and seal it with a small sticker (or stick it with a glue stick and draw some decorations). Insert the wrapped card into the wire, and then fill the wire with a paper tube filled with pens and pencils.