1. Requirements for the pie pressing test: 6 raised round pancakes are staggered on the road surface, and vehicles must pass continuously on the 6 round pancakes; vehicles cannot press on the round pancakes. It is also not allowed to rub the round cake; the wheels are not allowed to exceed or press on the edge lines on both sides of the road.
2. Scoring criteria for the pie-crushing test: 20 points will be deducted for rolling a round pie; 20 points will be deducted for not following the prescribed route; failing if you stop midway; and 20 points will be deducted for stalling.
3. Driving skills for the pie-crushing test:
1. Shift into 1st gear, use the clutch to control the speed, and align the left assembly line of the front cover with the No. 1 and 2 manhole covers. Slightly outward on the left side, pass the No. 1 and 2 manhole covers;
2. When passing the No. 2 manhole cover, observe the trademark in the lower left corner of the front window. When the trademark slowly moves to the right of the No. 3 manhole cover, When the edge is outside (it's better to be late than early), make 2 circles to the left. When the left assembly line of the front cover is close to the mark point on the ground, turn 2 circles to the right and return to the positive direction (you can also observe the position of the center extension line of the manhole cover in advance). , control the direction of the car), and pass the No. 3 manhole cover;
3. When passing the No. 3 manhole cover, observe the third node of the wiper on the right under the front window (counting from the head of the wiper to the left The third node) slowly moves to the outside of the right edge of the No. 4 manhole cover (it's better to be late than early), make 2 circles to the right, observe that the left assembly line of the front cover of the car is close to the mark point on the ground, and turn 2 circles to the left. Return to the right direction and pass the No. 4 manhole cover;
4. When passing the No. 4 manhole cover, observe the top of the left-view rear mirror. When the No. 5 manhole cover has completely moved to the top of the left-view rear mirror (Never mind the late Early), make 2 circles to the left, observe when the left assembly line of the front cover of the vehicle is close to the mark point on the ground, turn 2 circles to the right, return to the positive direction, and pass the No. 5 manhole cover;
5. Pass the No. 5 manhole cover When the manhole cover is installed, observe that the third node of the wiper on the right side under the front window slowly moves to the center of the No. 6 manhole cover (it's better to be late than early), make 2 circles to the right, and observe that the left assembly line of the front cover is close to the mark on the ground. When clicking, turn 2 circles to the left, return to the normal direction, and pass the No. 6 manhole cover;
6. After passing the No. 6 manhole cover, turn 1 circle to the left, enter the road, and return to the normal direction.