Question 1: Can I paste the wallpaper myself? What is the approximate budget? If you rent the house for 60 yuan and install it yourself, it will probably be a waste of materials! Not only wallpaper, but also glue, glue powder, base film, tools, and even whether the wall needs to be repaired. Have you considered these?

The cost of the materials is about 1,000 according to the cheap ones, so you can do it yourself If not, hiring someone to deal with the wall is not included. The manual cost of wallpapering is about 30 per roll. You will need about 15 rolls.

Let me give you a suggestion, it is better to repair and paint. If you can't find anyone, I can help you introduce a painter, guaranteed to be affordable!

Question 2: My interior is already white, can I still put wallpaper directly on it? I sell wallpaper. Please feel free to post it. It doesn't matter. You can just paste it directly. Some customers have had this question before, but it has been almost 6 years since I posted it and there has been no problem at all. However, one thing that the poster should pay attention to is that it is best for the poster to choose some special base films.

Question 3: Can wallpaper be pasted directly on top of the original wallpaper? 1. There are generally several situations when pasting new wallpaper on the wall of the original old wallpaper. One situation is because the original base is not necessarily very dense. This may cause the newly installed wallpaper to peel off after being applied.

2. There is a second situation, that is, the original old wallpaper is made of special high-purity wallpaper, such as high-purity wood pulp wallpaper. So now that we know there are two situations, how should we deal with them?

In fact, this is easy to handle. Let’s talk about the first situation. The first situation is that the original old wallpaper needs to be eradicated. After eradication, you need to check it first. If the original paint is relatively tight and has not fallen off, you can directly paint the base film on it. But if the original paint is unstable, you need to eradicate the original paint. There is a base. Remove the putty layer and paint again.

In the second case, just soak a wet towel in water and put it on the original old wallpaper until it gets soaked. See if there is any bulging. If not, you can directly paste the wallpaper on it. . If there is a bulging phenomenon, all the original old wallpaper should be eradicated, and then the same treatment as in the first case will be enough.

Question 4: Can I buy wallpaper on Taobao? Can you post it yourself? What tools are needed? You can buy wallpaper and paste it yourself, but wallpapering is a technical job that requires a lot of skills and precautions.

Tools and materials used for wallpapering: glue, roller, brush, towel, sponge, sandpaper, cutter, scraper, tape measure, glue container, etc.

The process of wallpapering and points to note:

1. Treatment of the wall

1. Shovel the old wall that has been painted with paint. First shovel off the wall paper, especially if it is peeling, otherwise the wallpaper will easily fall off after being applied. Because the paint on a new house is very thin, you only need to scratch the wall directly.

2. Wall approval: For walls that have been shoveled, or the walls of new houses, there are more or less uneven places, so it should be based on the specific wall conditions, especially the holes and cracks. Pave it with gypsum powder to make the wall look very flat.

3. After polishing the wall surface, let it dry for a day or two. After it is completely dry, sand it with sandpaper. Sanding the wall can smooth out the small particles and uneven surfaces produced by the wall. The above three small steps are also necessary for painting.

2. The purpose of brushing the wallpaper base film and the base film is to form a strong protective layer on the wall to ensure that the wall will not be damaged when the wallpaper is changed next time, and it also acts as a waterproof and mold-resistant layer. role.

Relatively speaking, the base film is odorless and environmentally friendly, and does no harm to the body; varnish can make the wall surface stronger and more effective, but varnish has a strong smell and contains toxic substances. Inhaling too much is harmful to the body. There is a lot of damage. To brush the base film, first prepare a large basin, a roller, and a paint brush.

Pour the base film into the basin, add appropriate amount of water according to the instructions, and adjust it to the appropriate concentration. Then you can use a roller to start painting a large area, and use paint to paint the corners

Make sure that every corner is coated with base film; if you are using varnish, pour an appropriate amount of varnish into a basin, add banana water to dilute it, and adjust it to the appropriate concentration. Just paint the wall as above

However, before applying varnish, if the floor has been laid, it is best to spread some newspapers around the floor against the wall to prevent the varnish from staining the floor, which will be difficult to remove.

3. Check the wallpaper wall

After processing, it is best to wait for the wall to dry before applying wallpaper. During this period, you can check the wallpaper you bought to see if there are any unexpected problems. First look at the color and pattern to confirm whether it is the wallpaper you ordered, and then look at the model number and batch number of each roll of wallpaper to see if it is from the same batch number to ensure that there is basically no color difference. Check again to see if there is a roll number

(Some manufacturers do not have a roll number). If there is a roll number, then arrange the wallpapers in order according to the roll numbers, because the roll numbers closest to each other are wallpapers. The color difference between them will be minimal. If you order a lot of wallpapers of the same style, sort them by box number first, and then

arrange the roll number.

4. Prepare wallpaper glue. Pour the wallpaper glue powder into a basin, slowly add water, and mix it into a rice flour paste. You can wait for half an hour, because the wall powder will slowly expand when it absorbs water. If you find that it is too When it's dry, you need to add more water. It is best to leave some of the wall powder behind when pouring it, because if the glue is diluted, you can add a little more wall powder. Finally, after mixing the glue, you can use a chopstick to insert it vertically into the basin and try it. If it is not poured out immediately

it means the concentration is OK. Then add the purchased wall glue and mix well to increase the viscosity of the glue.

5. Cut the wallpaper. First measure the height of the wall and then cut the length of the wallpaper. For non-flowered wallpaper, cut it according to the height of the wall

A length of about 5 to 8 centimeters is used for upper and lower trimming; for wallpaper that needs to be decorated with flowers, you need to look at the size of the pattern cells to estimate the amount of space you need to reserve for the flowers. Size, determine the length of each wallpaper. Then cut them in order according to the paper roll number of the previously arranged wall

. Each piece of wallpaper that has been cut out must also be placed in order, especially not randomly. In this way, the previous sorting work will be in vain, and the wallpaper will be prone to color difference problems. Under normal circumstances, you can only

cut 3 rolls of wallpaper first, and try to apply them to ensure there is no color difference. Because even if there is obvious color difference in the wallpaper, the manufacturer will only compensate for up to 3 rolls.

6. Apply glue. Use a brush to apply wallpaper glue on the back of the cut wallpaper. Pay special attention to the surrounding edges that must be fully coated with glue to ensure construction quality. Fold the glued surface and leave it for 5-10 minutes (note, do not apply external force to avoid creases in the wallpaper, especially if it is a loose cloth). After the glue completely penetrates into the bottom of the paper, you can put it up. Apply several pieces of wallpaper at a time, and follow the instructions. Posted in order.

7. When laying wallpaper, you usually put the first piece of wallpaper by the door or in the inner corner from top to bottom. Use a scraper to gently scrape the wallpaper from top to bottom, from the inside to the outside, and squeeze out the wallpaper. Air bubbles and excess glue will make the wallpaper flat and close to the wall. The first one...>>

Question 5: Can self-adhesive wallpaper be directly pasted on the wall? Self-adhesive wallpaper is adhesive-backed wallpaper, like double-sided tape, with labels Generally speaking, this kind of wallpaper is not suitable for long-term living or mid-to-high-end decoration. The base material of self-adhesive wallpaper is not very good. The unevenness of the wall affects the visual effect. It has a strong sense of concave and convex. Moreover, it has no personal taste when applied, and the craftsmanship is poor. Generally, self-adhesive wallpaper is suitable for girls or young people and children. They like to stick it here and there. It feels very convenient and good. Jixin wallpaper is sold online at a very cheap price. There are also self-adhesive wallpaper stickers. You can go there. Compare a lot.

Question 6: I want to buy wallpaper online and put it up. Is it easy to put it on? Is there anything I should pay attention to? Just buy it and bring it back! It’s not expensive to hire someone to post it! It takes a lot of tools to apply it yourself! It’s quite troublesome. I bought it myself and asked someone to post it! A TV background wall costs 50 yuan

Question 7: Can self-adhesive waterproof wallpaper be applied by oneself and how to apply it? Self-adhesive wallpaper is widely used in house decoration and is an important embellishment of wall decoration.

But if you buy a second-hand house and want to renovate the house, you may need to remove the self-adhesive wallpaper, but how to remove the self-adhesive wallpaper becomes a big problem. Below I recommend a method to everyone, I hope it can help you.

How to peel off self-adhesive wallpaper?

Latex paint wall

You can use a hair dryer to heat it appropriately (do not heat continuously, because the glue on the back of the three-dimensional wall sticker will Due to excessive heating, it is easier to degumm when tearing.) When the temperature reaches about 40 degrees, you can try to tear off the corners with your hands. If no degumming is found, you can slowly tear it off. For larger styles, you can gradually remove it according to the above method. This method can basically avoid tearing off the wall paint at the same time, but there may be a very small part of the glue left on the wall. Use a wet towel to heat the area with glue, and when you see the glue softening, slowly peel or wipe it off. .

Wallpaper

If it is PVC wallpaper, it can be removed according to the above method. A small part of the glue can be scrubbed clean. If it is pure paper wallpaper and non-woven wallpaper, it is not recommended to remove it. Three-dimensional wall stickers. There is currently no effective method.

Three-dimensional wall stickers are relatively sticky. If they are removed after just six months, it will easily damage the latex paint surface of the wall. At that time, you can only replace the wall stickers. The wall has been changed again. I am tired of looking at the three-dimensional wall stickers and want to replace them. It is best to use a hair dryer to dry the adhesive film of the wall stickers and then gently tear it off. This method is safer.

Glass

can be torn off directly. The remaining glue can be scrubbed with alcohol, detergent, gasoline and other items, or it can be removed according to the first method.

Suggestion: three-dimensional Wall stickers should be stuck on the glass as much as possible to facilitate replacement and removal. It is generally not recommended to remove the wall stickers from other walls, because even if the wall is not damaged and no glue is left on the wall, due to the long time, the stuck and unsticked surfaces may become stronger. There will be color difference.

In addition, if you want to re-attach wall stickers, it is best to choose good quality removable three-dimensional wall stickers. The best removable three-dimensional wall stickers not only leave no residual glue, It can also be peeled off without damaging the latex paint wall.

How to apply self-adhesive wallpaper

1. Fill the cavity in the wall with putty and level the wall with a scraper .

2. Measure the size of the wall, and then measure the wallpaper based on the wall area. Pay attention to the length of the wallpaper, which is 5cm longer than the actual top and bottom of the veneer.

3. Then mix the powdered wallpaper glue with water. Mix it with 1:3 for general wallpaper and 1:2 for foam wallpaper. Or use special glue for wallpaper that does not need to be mixed and paste it with a roller brush. Brush the mixed wallpaper glue evenly on the back of the wallpaper.

4. Then place the wallpaper against the wall and use a wooden handle brush to apply it from top to bottom and from the corners inward to smooth the wallpaper.

5. When encountering a power switch or socket, first cover it with wallpaper and then use a wooden handle brush to smooth it, then use a utility knife to draw a cross diagonally on it, and use a scraper to hold the edge of the switch , use a utility knife to cut off the excess part.

6. If you encounter a connection between printed wallpapers, find the consistent position of the pattern at the junction of the two wallpapers, overlap and paste it about 12cm wide. After the entire wallpaper is aligned, use a scraper to hold it, and then Just cut off the overlapping parts with a razor blade.

7. When applying wallpaper, pay attention to applying it from top to bottom. If you find uneven floating areas, you can use a towel to moisten it and then use a scraper to level it again.

8. Finally, treat the wallpaper around the doors and windows in the same way as the wallpaper at the power switch.

9. After the wallpaper is pasted, put it back into the original device and you are done.

Self-adhesive wallpaper is very convenient to use. It can be applied by one person. It has glue on the back. Just remove the film and apply it. But if you want to tear off the wallpaper and replace it with a new one, you need to learn the above tips, which are very practical and convenient and will definitely help everyone.

Question 8: How do I put up wallpaper? How do I choose the best kind of wallpaper? The house area is 24.5 square meters; rental houses are generally simply decorated, you can:

1. Buy white latex paint and add it with your favorite color (beige, light blue, etc.), which is the most economical;

p>

2. Paste: For self-adhesive wallpaper, apply varnish on the wall first so that it will not come off and stick firmly, which is more expensive.

3. For example, if you want to put up wallpaper, you have to hire a master to do it, which is not cost-effective.

Question 9: Can you buy wallpaper and paste it yourself? 10 points It is not recommended to pave and paste it yourself. You need to align the flowers and pay attention to some processes during construction. It is recommended to find a professional to pave and paste it for 30 yuan per roll

p>

Question 10: Why does the newly pasted wallpaper bulge? Can it be automatic? There are three situations.

1. The construction process is not good and the glue is not evenly applied. In this case, just take a syringe, suck in a little white latex, put it in, and it'll be fine.

2. If the wallpaper bottom is not done well, the putty will separate from the wall, which will be troublesome. You need to open the wallpaper, then process the bottom, and then patch up a piece of wallpaper. If you are skilled in craftsmanship, you won’t be able to tell.

3. In addition, as the first floor said, just follow the method he provided.