Operating steps:

1, pour appropriate amount of boiling water into the bowl, subject to the label.

2. After the upper paper of the label is soaked, tear it off by hand.

3. Pour out the boiling water in the basin, leaving only the offset printing at the bottom of the bowl.

4. Dry the bottom of the bowl.

5. Prepare some waterproof tapes.

6. Stick the waterproof tape on the place with glue marks at the bottom of the bowl and flatten it on all sides.

7, pull up the tape, the tape will be stained with some glue marks.

8. After repeated pasting, the label on the bottom of the bowl is completely removed.

Ceramic self-adhesive label:

In addition to the above two methods, the self-adhesive labels (trademark labels) on porcelain can be removed, and the self-adhesive labels on stainless steel or iron utensils, wooden utensils and plastic utensils can also be removed by the above two methods.

It should be noted that some plastics are not resistant to high temperature. If you use the hot windshield of a hair dryer, the plastic will be deformed if you blow it for too long. Boiling will also lead to some plastic deformation that is not resistant to high temperature, so for plastic utensils, it is necessary to use hot air to blow and cook carefully, and use warm water instead.