The logo of Bridgestone tire is Bridgestone. Bridgestone tire identification refers to marking the production number, manufacturer's trademark, size specification, grade, maximum load and corresponding air pressure, Chinese phonetic code of carcass ply, installation requirements and driving direction signs on both sides of the tire according to national standards.

Bridgestone tire symbol is Bridgestone, tire brand, logo and vector symbol:

1.ISO mark: ISO mark is the abbreviation of International Organization for Standardization. There are ISO9000, ISO9002 and so on. Following the ISO logo, tire dimensions must be expressed in the following way. For example, the meaning of 2 15/80R 1682H data;

2.2 15: indicates the tire width (215 mm); ); 80: Represents flattening ratio (flattening ratio is the ratio of tire sidewall height to tire width, expressed as an omitted percentage). That is, 80 stands for 80%);

3.R means that the tire has a radial structure (R means radial structure);

4, 16: indicates that the nominal inner diameter (or hub diameter) of the tire is 16 inch;

5,82: indicates the load level, that is, the maximum load index that can be sustained. According to the requirements of most tire manufacturers, the requirements of different manufacturers are different. The approximate load level and the corresponding load table are given in the appendix below.

Million car purchase subsidy