Sanqi n95 masks are of good quality.

Sanqi can be regarded as a Chinese national brand, and its popularity overseas is no less than that of the 3M mask brand. During the fight against the COVID-19 epidemic, Sanqi’s story was even published in the People’s Daily. As a highly professional mask manufacturer, Sanqi has passed audits and certifications in many countries since 2001.

Sanqi medical protective masks have a four-layer structure, with an extra layer of electrostatic cotton, which increases the mask's adsorption effect on particulate matter. This product complies with the national standard GB19083-2010, with a filtration efficiency ≥95 and belongs to level 1 Medical protective masks, quality guaranteed. Sanqi medical protective masks are specially designed for occupationally exposed personnel and key personnel.

Steps for wearing Sanqi N95 mask:

1. Place the ten fingers of both hands above the nose clip, place your thumbs under the nose clip, and gently bend the center of the nose clip.

2. Pull the folded N95 mouthpiece up and down on both sides with both hands to fully expand it, keeping the two headbands on the side with the nose clip.

3. Hold the lower side of the N95 mask on your chin, position the nose clip at the bridge of the nose, put the N95 mask on your face, and use one hand to fix the N95 mask on your face. Use your other hand to pull the lower side of the mask down so that it covers your chin.

4. Pull a headband over your head and place it on the back of your neck and below your ears.

5. Pull the other headband over your head and place it on top of your head. If necessary, you can use the specially designed protrusions on both sides of the N95 mask to adjust the mask to obtain a comfortable fit.

6. In order to obtain a comfortable fit, when pulling the N95 mouth to the edge of the chin, use the other hand to hold the nose clip to fix it.

7. Place the fingertips of both hands on the top of the N95 mouth-mounted nose clip. Starting from the midpoint, press the nose clip so that it fits the nose and face. Note: pinching the nose clip with one hand will cause the nose to The clip has a sharp angle, which reduces the tightness between the N95 mask and the face. Be sure to use both hands.

8. Check the air tightness of the dust mask. Cover the dust mask with both hands and exhale. If you feel air leaking from the bridge of the nose, readjust the nose clip according to step 5. If you feel air leaking from the edges of the dust mask, adjust the position of the headband.