Installing a cabinet pull basket in the kitchen can not only store tableware, but also keep it tidy and beautiful. Next, the editor will explain to you how to install the cabinet pull-out basket and how to maintain the cabinet drawer pull-out basket.

1. Cabinet pull basket installation method

1. Drilling

Choose a suitable drill bit and use the drill bit to drill a hole about the size of a screw on the cabinet body. Drill holes for easy installation.

The different materials of the cabinet will also affect the size and type of drill bits for screws. If the material of the cabinet is relatively hard, then the marble drill bit will be better than the glass drill bit.

2. Installation screws

When installing the cabinet basket, the screws must be aligned with the drilled holes. If the position deviates, it will not only affect our subsequent installation, but also make it very difficult to use later. Inconvenient, even unusable.

3. Matching guide rails

When installing the cabinet basket, the screws must be aligned with the drilled holes. If the position deviates, it will not only affect our subsequent installation, but also make it very difficult to use later. Inconvenient, even unusable.

4. When installing, be sure to pay attention to the level of the basket, and the heights on both sides should not be different. During operation, the drawers and cupboard baskets should be installed as far down as possible, so that not only can more things be loaded, but they are also convenient to use. The panel should be sealed with small screws, because it is difficult to use front and back, and the screws can easily be pulled out after a long time.

2. Maintenance methods of cabinet drawer baskets

1. Cabinet drawer baskets should be maintained regularly. You can use wax oil with strong decontamination ability and apply it on a clean cotton cloth. Clean the surface to extend the service life, but be careful not to use detergents containing bleaching ingredients, steel balls, grinding tools, etc.

2. If there is dust or dirt on the surface, clean it with soap and weak detergent in time. Do not use organic solutions and corrosive chemicals, such as bleach and vinegar, to avoid damaging the surface finish and causing The product loses its luster.

3. For trademarks and films on the surface of the basket, you can clean them with warm water and weak detergent, then wipe them clean with a soft rag, and then clean them with neutral detergent.

4. Keep the air flowing and develop the habit of opening and closing doors and windows. You can wipe with soft cotton cloth and clean water to ensure the bright luster of the product.

When installing a cabinet basket, pay attention to the horizontality of the basket. Ensure that both sides are level before drilling holes for installation. For daily maintenance, soap or detergent can be used to clean the drawer basket, which can extend the life of the drawer basket.