Introduction of Smythe wall-hung boiler: (no advertisement)
Product features:
Miniature design.
Save on gasoline costs.
There are more than fifty kinds of safety protection devices.
A happy boiler that can enjoy a half-length bath at 39 degrees Celsius.
12 hour reservation function, which can set the boiler start-up time at will.
The heating output power is large, and the powerful circulating pump makes the heating effect more comfortable.
Advanced indoor temperature control design is beautiful and easy to operate.
Detection of pipeline leakage, excellent safety function.
The use of dry heat exchanger improves the durability.
Fully automatic proportional control is used to achieve the best starting conditions.
Outdoor anti-freezing function can better reflect the humanized design of boiler.
Adopt advanced European Hydro block system, which is corrosion-resistant and permanent.
It has the function of rapid drainage, which can reduce waste, and the fine adjustment of one degree Celsius can be realized by using hot water.
Various functions that are convenient for consumers.
How to use:
The standard gas wall-hung boiler provides heating and sanitary hot water operation modes, and there will be two selection gears in winter/summer on the gas wall-hung boiler control panel. In winter, the gas-fired wall-hung boiler can provide heating and sanitary hot water functions, and the sanitary hot water function takes precedence, so the gas-fired wall-hung boiler will automatically switch between heating and sanitary hot water modes according to the user's sanitary hot water usage.
In summer, gas-fired wall-hung boilers are usually in standby state, and only when users use sanitary hot water can they enter the sanitary hot water mode. Therefore, users can choose the winter file when they need heating and use sanitary hot water in winter, and choose the summer file in the rest time, only using the sanitary hot water function.
Plug in the power supply, open all valves, and then open the heating and water supply valves under the stove. Adjust the water pressure to 0.5- 1, close the valve, turn on the hot water switch, dial the digital display to 75 degrees, and turn right in the middle. Turn on the tap and you can use hot water. When you use the heating for the first time, you should exhaust the air and then pressurize it. Just adjust the temperature to the right level. The heating must be turned off in an unoccupied room.
Installation requirements of Smythe wall-hung boiler:
When installing a wall-hung boiler, you should choose according to the product characteristics of different brands. The biggest advantage of Smythe wall-hung boiler is that it is easy to install, and the whole process is simple, so it does not need to spend too much manpower and time. In addition, for the wall-hung boiler, its internal structure design is in line with certain use principles when processing, so consumers must pay attention to more well-known brands.