The speed of the fully automatic screen printing machine can be set as needed on the control panel.

The fully automatic screen printing machine has the following characteristics:

One host characteristics

This machine is widely used in PET, PVC, transfer paper (film), floor heating Film, geothermal film, electric heating film, decorative paper, film, nameplate, flexible circuit board, mobile phone buttons, 3M glue, glue, membrane switch, trademark laser, scratch card, self-adhesive label, barrel paper, ribbon, Screen printing of aluminum foil, copper foil and other roll materials.

1. Fully automatic electric eye alignment for multi-color printing, computer control, automatic detection of color marks, and automatic shutdown if there is any abnormality.

2. Using CNC motor, the printing and ink return speed can be set in sections at will.

3. Using CNC motor, the printing and ink return distance can be set at will.

4. Automatically calculate the printing quantity, and can set the printing number to automatically stop.

5. Photoelectric control of loading and rewinding prevents scratches on the surface of the substrate and improves printing quality.

6. It adopts precision regulator and the electric eye has high precision.

7. Equipped with dust removal roller to remove dust on materials.

8. Equipped with an off-grid function to prevent web sticking when printing large-area background colors and printing glue.

9. It adopts a three-stage air suction device, which can adjust strong wind, weak wind and close according to the requirements of printing materials.

2 Feeder characteristics

1. Photoelectric control of discharging to avoid scratches on the material surface.

2. The feeding speed and time can be adjusted at will.

3. The starting speed of discharging can be adjusted at will. The starting frequency starts from 0 and slowly increases to running to avoid starting too fast and causing scratches on the material surface.

4. Equipped with automatic protective film tearing device.

Three dryer characteristics

1. Circulating hot air drying, adjustable temperature, automatic winding.

2. This oven occupies a small area and has a length ranging from 32 to 60 meters. It can achieve low-temperature drying, ensure that the printing material does not shrink and deform, and is conducive to multi-color printing.

3. The fuselage is equipped with a heat insulation layer to maintain heat and save energy.