For the self-adhesive marks on the surface of hard objects, you can apply grease-free nail polish remover on the surface of the object, and then gently wipe it with a soft cloth; These traces can also be removed with industrial alcohol or gasoline. If these stickers stick to your skin, you can also remove them with lemon juice.

In addition, hand cream can also achieve the effect of removing adhesive. Hand cream contains a lot of water (generally above 70%) and a certain amount of surfactant. Surfactant has good wetting, penetrating and dissolving ability, and can quickly penetrate between the adhesive and the surface of the object, thus achieving the purpose of cleaning. You can also find some similar products, such as face cream, facial cleanser and detergent, which have the same effect.

Transparent glue trace

1, using oil painting brush liquid (turpentine)

The effect is very good. I suddenly thought of the tape marks on the drawer when I was painting just now, so I wiped them off with some pen-washing liquid on the facial tissue.

Moreover, a part of the glue is automatically adsorbed on the facial tissue, and the stickiness disappears completely.

It's as easy as dust being swept away by a soaked paper roll.

At least four yuan a bottle, you can buy it at the art store.

2. In the process of pasting transparent adhesive, the binding water in the middle of the adhesive tape is lost and cemented.

Similar to the miscible principle, if you continue to use new tape, you can slowly stick the old tape, or directly use gasoline and banana oil, and the effect of water use is the least ideal.

3. If the area is not large, consider using an eraser. If you have expired hand care skin care products at home, apply them on the rubber surface, because the binding water in the adhesive tape is supplemented, so the viscosity is reduced and the effect of removing traces is very good.

4. Soap with a little mixture of ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny (this article is suitable for tiles, ceramics, glass, etc. ).

5. Some surfaces can be removed by repeatedly sticking and tearing with transparent adhesive.

6. Wipe it off with a little sodium chloride or paint thinner.

7. You can blow dry with a hair dryer and then scrape it gently.

8. Wipe with a cotton swab dipped in nail polish remover.

9, wind oil fine rub.

10, wipe with special cleaner or sports shoes decontamination paste.

1 1. It can be erased with 4b eraser for painting, which is a very soft Korean eraser.

12. If the trace left behind becomes hard after a long time, you can soften it with a hot towel first and try again.