Step 1: Prepare.
First of all, you need to prepare the parts needed for the HP TV base, and then put the TV in a stable position. Be careful not to put the TV on a high place to avoid slipping or accidentally breaking it.
Step 2: Open the package.
Open the box and slowly take out the components needed for the HP TV base. Be careful not to lose parts.
Step 3: Install the base.
Connect the base unit to the TV with a small screwdriver. Pay attention to the tightening degree of the screws, and don't tighten them too tightly, so as not to damage the screws or the TV set.
Step 4: Connect the TV to the cradle.
Connect the interface between the base and the TV, and pay attention to whether the position and direction of the interface are correct.
Step 5: Adjust the bottom angle.
According to personal needs, adjust the angle of the base to ensure that the TV angle is appropriate when watching, which can greatly improve the viewing experience.
Step 6: Complete the installation.
After all operations are completed, check whether the connection and fastening are correct, then plug in the power supply and start using it.
abstract
Through the above six steps, you can easily install the base of HP TV, which is an important job of watching TV. Correct installation can avoid accidental damage to the TV and better enjoy watching.