Current location - Trademark Inquiry Complete Network - Trademark registration - The technical parameters of Tianshui 213 thermal overload relay JRS4-09301d are
The technical parameters of Tianshui 213 thermal overload relay JRS4-09301d are

Model/Specification: Brand/Trademark:

Product Introduction: Application: Thermal/thermal overload Brand: Tianshui 213 Model: JRS4-12316d Product Series: JRS4 Contact Form : One open and one closed current properties: AC Appearance: small

JRS4 series thermal overload relays are used in circuits with currents of 50Hz or 60Hz and rated voltages up to 660V for overload and phase failure protection of AC motors.

This relay has the same characteristics as the LR2-D series thermal relay and can be used interchangeably.

2. Model, parameter size

3. Structural characteristics

Bimetal type, with setting current adjustment device, phase failure protection, manual reset, etc. .

IV. Main technical parameters

Model JRS4-13 JRS4-33

Rated insulation voltage Ui (V) 660

Auxiliary circuit Rated operating voltage Ue (V) AC: 380 DC: 200

Agreed heating voltage Ith (A) 10A

Auxiliary contact usage category AC-15 DC-13

Ambient air temperature (℃) -25~ 45

Altitude (mm) ≤2000

Atmospheric conditions Ambient air temperature is 40℃, relative atmospheric humidity does not exceed 50, 25℃ The maximum relative humidity does not exceed 90

Comply with the standard GB14048.4

The storage environment temperature is -40℃, the relative humidity does not exceed 95

Pollution level 3

Peripheral protection level IP00

After the reset performance thermal relay is buckled normally, the reset time is not more than 5 minutes

The main circuit line end can be connected to a soft wire ( mm2) 4 10 16

Hard wire (mm2) 10 16 25

Number of wires 16 2 1

Note: The discrete installation accessories of this product are from our company Supply; set current adjustment range and number (standard motors use contactors according to the table).

Model current adjustment range (A) Control motor power (AC3) Plugable contactor weight (kg) Short-circuit protection fuse (A)

(KW)

(KW)

p>

220V 380V 415V 440V 660V CJX2-09-32 0.120 am Gg

JRS4-1301 0.1-0.16 CJX2-09-32 0.120 0.25 -

JRS4-1302 0.16 -0.25 CJX2-09-32 0.120 0.5 -

JRS4-1303 0.25-0.40 CJX2-09-32 0.120 1 2

JRS4-1304 0.40-0.63 0.37 CJX2-09-32 0.120 1 2

JRS4-1305 0.63-1 0.55 CJX2-09-32 0.120 2 4

JRS4-1306 1-1.3 0.37 0.55 0.75

1.1 CJX2 -09-32 0.120 2 4

JRS4-1307 1.6-2.5 0.37 0.55

0.75 1.1 0.75

1.1 1.5 CJX2-09-32 0.120 4 6

JRS4-1308 2.5-4 0.55

0.75 1.1

1.5 1.1 1.5 3 CJX2-09-32 0.120 6 10

JRS4- 1310 4-6 1.1 2.2 2.2 2.2 4 CJX2-09-32 0.120 8 16

JRS4-1312 5.5-8 1.5 3 3

3.7 3

3.7 5.5 CJX2-09-32 0.120 12 20

JRS4-1314 7-10 2.2 4 4 4 7.5 CJX2-09-32 0.120 12 20

JRS4-1316 10-13 3 5.5 5.5 5.5 10 CJX2-09-32 0.120 16 25

JRS4-1321 13-18 4 7.5 9 9 15 CJX2-09-32 0.120 20 32

JRS4-1322 18-25 5.5 11 11 11 18.5 CJX2-09-32 0.120 25 50

JRS4-1353 23-32 7.5 15 15 15 22 CJX2-09-32 0.300 40 63

JRS4-3355 28 -40 10 18.5 22 22 30 CJX2-40-65 0.300 40 80

JRS4-3353 23-32 7.5 15 25 15 22 CJX2-40-65 0.340 40 63

JRS4- 3355 30-40 10 18.5 22 22 30 CJX2-40-65 0.340 40 80

JRS4-3357 38-50 11 22 25 25 37 CJX2-40-65 0.340 63 100

JRS4-3359 48-57 15 25 30 30 45 CJX2-40-65 0.3

40 63 100

JRS4-3361 57-66 1.5 30 37 37 55 CJX2-40-95 0.340 63 100

JRS4-3363 63-80 22 37 45 45 75 CJX2-40 -95 0.450 80 125

5. Appearance and installation dimensions