Current location - Trademark Inquiry Complete Network - Trademark registration - How to get rid of the sticker on the bottom of the newly bought stainless steel basin?
How to get rid of the sticker on the bottom of the newly bought stainless steel basin?
Heat the other side of the label with a hot air blower for about 3 minutes, and then tear it off directly by hand. If there is offset printing on it after tearing, wipe it off with a hot rag.

There are many ways to remove stains from smooth objects at home. You can try the following methods:

1. Adding a little mixture of ammonia water and turpentine to soap can remove a lot of offset printing on glass.

2. Repeated pasting and tearing with transparent adhesive can remove part of the surface.

3. Wipe it off with a little dilute sodium water, or use paint thinner.

4, you can use a hair dryer to blow dry, and then gently scrape.

5. Wipe with a cotton swab dipped in nail polish remover.

6, wind oil fine rub.

7. Wipe with special cleaner or sports shoes decontamination cream.

8. You can erase it with 4b eraser for painting, which is a very soft Korean eraser.

9. If the marks left for a long time have hardened, you can soften them with a hot towel and then wipe them.