Sunroom decoration design is not difficult, but there are a few knowledge points that we need to know in advance. For some people, a sunroom may not be clear about what it is. This time, the editor of Changzhou Decoration Network has compiled knowledge points about sun rooms, allowing us to understand how to decorate sun rooms, as well as issues that need to be paid attention to, so as to create a sun room of our own. Sunrooms are actually also known as glass rooms. On the whole, the non-traditional building built with glass and metal frames can enjoy the sun and meet the purpose and need of being close to nature. Sunlight indoor decoration should implement heat insulation, sunshade, and sun protection treatment plans. For example, you can put on sunscreen to solve the problem of too high temperature in the sunroom, without blocking the line of sight, and maintain the visual transparency of the sunroom. Sunshade can block ultraviolet rays and radiant heat, prevent indoor overheating, reduce ultraviolet rays by about 80%, and achieve the purpose of energy saving and sun protection.

It is important to know the main structure of the sunroom. It is the most durable pillar. But when we usually build a glass house, we should first consider the structural issues of the glass house. The structure of our solar room should be based on the spatial area structure of the roof we measure. Everyone, please pay attention! The area of ??the glass room cannot be changed privately. If you change the area at will, you may have safety risks, and if you are not careful, you will violate the building. When owners plan a courtyard in their exclusive sunroom, they do not need to lay the floor tiles too flat. It is best to lay them in ditches or the like. This helps preserve water and soil to a certain extent, and the natural geology and landforms also adopt this more environmentally friendly scientific approach. The roof floor drains are appropriately lowered to the ground at the corners to facilitate excess moisture in the soil to drain from the ground. That is to lay an isolation layer such as non-woven fabric on the wooden board to prevent sediment from being taken away or blocking the pipe during water leakage.

Sunroom drainage system When designing a sunroom, attention should be paid to the setting of the drainage system. In particular, the area of ??one trillion cannot be too large. If the amount of water is large, it is easy to leak, which will cause harm to the safety of the building for a thousand days. The design of the sunroom is obviously composed of various factors, so it is recommended to find a professional company before construction. It is recommended to take corresponding measures in terms of overall shape and structure for sunrooms with different uses. There is a locker in the sun room, which is usually placed in the corner of the sun room. However, when placing it in the corner, pay attention to whether the plants can go on the locker. If the plants can go on the locker, the locker will be susceptible to moisture. . There are two main ways to waterproof a sunroom: material waterproofing and structural waterproofing. There is a great danger in waterproofing materials. When the waterproofing materials fail, the sunroom will leak.

If the heat insulation effect of the solar room is not good and the temperature difference between indoor and outdoor is large, this phenomenon is likely to occur. The north is a region where cold religion phenomena occur frequently. This is because the weather in the north is relatively cold in winter, and the temperature difference between indoor and outdoor is large. After the cold air enters the room, it combines with the hot air to form water mist, which is adsorbed on the surface of the sun room, causing unnecessary phenomena and affecting the beauty of the sun room. In winter, the outdoor temperature is low, indoor heat loss is large, and the room temperature is low. In summer, the outdoor temperature is high, the indoor cooling loss is large, and the room temperature is high. The hotter the weather, the higher the air conditioning load. The root cause of the phenomenon of hot winter and cold summer in the sunroom is poor insulation effect of materials, incomplete products and auxiliary systems, or lack of product system standards and auxiliary systems.