The method is as follows:

1. Blow hot air at the small advertisement with a hair dryer, so that the small advertisement can be easily removed after heating.

2. face cream. When applied to small advertisements, it can quickly penetrate between articles and non-viscose, and then it can easily remove stains when rubbed. The cream can be kept for a long time and is very practical.

3. essential oil. Put a little on it and wait for two minutes. It can be easily torn off by hand.

4. You can tear off a layer of paper on the small advertisement, then you can apply alcohol or gasoline, then rub it back and forth on the surface with your hands, and finally wipe it off with a cloth.

5. Nail polish and hand cream can dilute and dissolve those non-stickies when applied to small advertisements.

6. Just brush off the steel ball with water, but it is not recommended to use it on precious metal articles, otherwise it will leave scratches.

Extended information:

1. Cleaning principle of label adhesive

1. Label adhesive, also known as trademark adhesive, refers to the adhesive used to stick labels, which is divided into three types: pressure-sensitive adhesive, hydrosol and water-re-wetting adhesive. Water-based label adhesive takes water as solvent, and it is mainly applied and glued when used, mainly including polyvinyl alcohol modified adhesive and casein modified adhesive, etc. Water-re-adhesive label adhesive is mainly used for labeling or bonding small packages such as stamps and envelope seals.

most of the label adhesives are pressure-sensitive adhesive. The pressure-sensitive label adhesive is also called self-adhesive label adhesive, commonly known as self-adhesive. It is a composite material with paper, film or special materials as the fabric, pressure sensitive adhesives coated on the back, and silicone-coated protective paper as the backing paper. The self-adhesive pressure sensitive adhesives contains substrate, tackifying resin and so on. According to the principle of chemical isomorphism and compatibility of polymers, the substrate or tackifier of self-adhesive is diluted with appropriate solvent to make it easy to be separated from the adhered object.

2. Cleaning principle of label adhesive: According to the components of the above-mentioned adhesive, it can be known that the components in pressure sensitive adhesives belong to organic polymer compounds in the chemical field, and their viscosity is relatively high. According to the principle of chemical isomorphism and compatibility of polymers, all organic solvents can dissolve the above polymer compounds, such as liquor, essential balm, alcohol, gasoline, or nail polish diluent, and other organic solvents, such as face cream, facial cleanser, detergent and hand cream, have the same effect.

2: how to remove the label adhesive of automobile glass label?

1. Use professional adhesive remover or adhesive cleaning agent to clean it, which is convenient and convenient, has obvious effect, does not harm the car body, and is safe and reliable.

2. Because the adhesive used in the trademark label is not resistant to high temperature, it is baked with the warm air of a hair dryer first, and then peeled off by hand, leaving no trace.

3. If there are still traces after the above treatment, the following methods can be used:

Soak the towel with hot water first, and then wipe it repeatedly on the adhesive traces with soap until it is removed, and finally wipe it with clear water. You can also dip a cotton swab in vinegar and wind oil to evenly smear it on the adhesive, and scrape it back and forth. After a long time, you can also remove the adhesive from the car glass, but the most obvious effect is alcohol.

Dip a soft cloth and the like into enough high-concentration alcohol, and then soak and wipe the adhesive, and the adhesive will become soft and detached. If the alcohol has no obvious cleaning effect on some adhesive, you can dip a soft cloth in a little gasoline to gently wipe the adhesive, but gasoline can wipe some plastics or parts.

three: there are many cartoon stickers on furniture, and security doors are often labeled with various stickers, which will leave residual glue after being torn off. How to remove it?

1. Since all kinds of self-adhesive are not resistant to high temperature, bake them with the warm air of a hair dryer first, and then the adhesive can be peeled off cleanly without leaving any trace. What if it has been torn off and there are traces? Any organic solvent such as alcohol, gasoline or kerosene can dissolve the glue. If it is on ground glass, scrape off the adhesive tape and wipe it with turpentine.

2. thickly coat a layer of wind oil, nail polish and hand cream on the adhesive sticker to be removed, let the above materials soak the adhesive sticker, wait for a while, and then wipe it hard with a dry cloth to remove it.

3. Use a special adhesive remover, first tear off the label, then spray the adhesive remover to wipe it, and finally clean it with water.

4. The easiest way to apply the label adhesive on jade is to apply a little cooking oil to the label, tear it off as soon as it is soaked, then dip some detergent in a clean cloth and wipe off the oil stains, or apply it with spray paint thinner and toothpaste, and then rub it repeatedly with a cloth to remove it.

5. Many woven bag products have trademark labels made of self-adhesive on them. Coat the surface with a layer of edible oil and leave it for 24 hours. After a day or two, the labels will lose their stickiness, so just tear them off.

6. Squeeze lemon juice on the hands and skin with adhesive dirt, and rub it repeatedly to remove adhesive marks. Advantages: it will not cause any harm to hands and skin. Disadvantages: the effect of removing the adhesive from other objects is not good.

four: how to remove the label sticker?

1. Machines, computers, metals, plastics, etc. all have anti-counterfeiting labels or warranty labels made of adhesive, which belong to anti-counterfeiting labels themselves and are firmly affixed. Many friends have bought all kinds of plastic products, glass products, ceramic products and even small household appliances from the supermarket. They all have trademark labels, certificate labels, anti-counterfeiting labels and so on. Barcode labels and price labels are difficult to remove the traces left by the self-adhesive after the labels are torn off. Here are some common methods.

2. For non-paper self-adhesive printed matter such as PVC, PE and other materials, it is relatively simple to remove, and it can be achieved by wiping and cleaning. First, tear off the self-adhesive decoration attached to the glass or commodity surface, soak the towel with warm water and add soap, and then wipe it repeatedly at the self-adhesive trace.

3. directly heat the labeled product in the microwave oven for 2 minutes, and then take it out. You will be surprised to find that the label is no longer sticky. You can easily peel off the label with your fingernail and clean the glue at the same time, provided that the product is not afraid of being heated.

4. Put the labeled items in the freezer or refrigerator for freezing. After freezing, the adhesive becomes hard and can be torn off directly, which is suitable for methods such as alcohol and scraping.

5. Use a blade or an ink spatula to remove most of the adhesive, then dip a cloth with gasoline or acetone and wipe the residual adhesive with alcohol. Both gasoline and acetone are good organic solvents, which can dissolve the adhesive and are suitable for removing hard bottom surfaces such as glass and floor tiles.

6. The simplest thing is that you can brush it off with a steel ball dipped in water, which is suitable for hard objects that are not beautiful, otherwise it will leave scratches.

7. If the glue area is small, you can directly wipe it off with an eraser. Otherwise, first tear off the label, soak the torn part with cotton and white wine until it is soft, then use a paper towel to absorb the water, and then use an eraser.

8. the most direct and commonly used method: if the label glue is not pasted for a long time, you can soak the adhesive part with hot water, and then apply cooking oil on the glue, and then wipe it easily with a dishcloth with good friction. This method will basically not cause damage to the items.

9. If it is paper label adhesive, you can blow it with a hot air blower, regardless of the glass, plastic, wood and metal of the sticker. First, blow it back and forth with an air blower for a few times, and then tear a small edge. The effect is very good, and you must be careful and patient when tearing. If it still doesn't work, you can dip a cloth in a little wind-repellent oil or use a rubber for further treatment. This method is only suitable for high-quality adhesive. Disadvantages: Not suitable for heat-resistant soft plastics or digital products.

1. Remove the label with rubber gloves. Put the bottle cap horizontally into one finger of the rubber glove, adjust the position to become a tool for wiping the label, dip some water in it, wipe the label that has been soaked in water, and slowly erase the label. The second part: according to the isomorphic compatibility principle, various organic solvents are used to clean up the solubility of self-adhesive trademarks, but these solvents may also cause damage to the surface of some items, so we should adjust measures to local conditions.

reference source Baidu encyclopedia? Label adhesive