First, prepare a bottle of essential balm and a piece of cotton cloth, pour some essential balm in the sticky place at the bottom of the basin and wet the cotton cloth with water. Then, wipe the sticky place at the bottom of the basin with cotton cloth, and remember to push hard. Finally, push the things stuck together in one direction and take them off directly, so that there will be no adhesion on the cotton cloth and no adhesion marks on the bottom of the basin.

Clever method of removing glue from plastic basin

Clever trick 1: Use the principle of rubber fusion to fuse the glue on the plastic basin with rubber. If you keep rubbing with an eraser, the place where there is glue will turn black at first, but after rubbing for a long time, the glue will slowly fall off. This operation is very convenient and quick, but the effect is average.

Coup 2: Use a hair dryer and rely on heat to remove the glue from the plastic basin. Use the hot air gear of the blower to blow directly for a while at a distance of about 10 cm from the glue on the plastic basin, and then slowly remove the glue while blowing. The operation is convenient and the effect is good, but it is not suitable for heat-resistant soft plastics.

Coup 3: Use vinegar, similar compatibility principle. Dip a dry cloth in vinegar, completely cover the adhesive part, soak it for 15-20 minutes, then wipe it off gradually along the edge of the adhesive with cloth, and finally soak it in clear water for a while. It is also suitable for glue on tableware such as bowls and chopsticks, which is non-toxic and harmless and has little decontamination effect.