The quality is average. In the same price range, the quality of Haibeide Tire 195 is acceptable, and its cost performance is relatively high.
HABILEAD Shandong huasheng tire group is an enterprise group that provides rubber products for the global market; Its main manufacturing equipment is imported from other countries, and its excellent technological performance and numerous product styles make its matching level high; Products mainly rely on quiet, low consumption, environmental protection and win a good reputation.
methods for identifying the quality of different types of tires:
1. bias tire: the adjacent cords of the carcass ply and buffer layer of bias tire cross each other and are arranged at an angle less than 9 with the center of the crown, and its specifications are "&& times; X-X "die-engraved impression, such as 6.5-16, 9.-2, etc. Skew tire has many layers of carcass skeleton materials, the dimension of the outer edge of the tire changes greatly before and after inflation, and the rolling circumferential deformation is large, which is not wear-resistant and stab-resistant, and is not suitable for high-speed long-distance driving.
2. Radial tire: The carcass ply cords of radial tire are arranged at an angle of 9 degrees or close to 9 degrees with the center line of the crown, and tightly bound with the belt. Its specifications are expressed by "×× r×××" die-engraved impressions, such as "P225／75R15, 9．R2" and so on. Radial tire carcass skeleton material layer is less, steel wire belt layer is used to tighten the carcass, the tire outer edge size changes little before and after inflation, the rolling circumferential deformation is small, it is wear-resistant and stab-resistant, and the energy consumption is low, so it is suitable for high-speed and long-distance operation.
3. Full-standard tires: Full-standard tires refer to tires produced by tire manufacturers that are tested by the quality inspection department of the enterprise against the corresponding national standards or enterprise standards, and all indicators meet the standard requirements. On the tire sidewall, the mold marks of the factory name, trademark, specification, standard rim, production license number, production number and related quality marks are clear and complete, and there is no smearing or knife scratching. However, the quality of tires with smearing or knife scoring is not guaranteed.