How to choose a good toilet:

Observe the glossiness of the toilet. Products with higher glossiness have higher density and are easier to clean and hygienic. This is because the quality of porcelain is directly related to the life of the toilet. The higher the firing temperature and the more uniform the firing temperature, the better the quality of the porcelain.

To see whether the glaze is uniform, consumers can ask the store whether the sewage outlet is glazed, or even put their hand into the sewage outlet and feel whether the return bay is glazed. The main culprit of staining is poor glaze. Customers can touch it with their hands. A qualified glaze must have a delicate feel. Consumers can be picky and touch the corners of the glaze (yin and yang corners). If the glaze is very thin, it will be uneven at the corners, the bottom will be exposed, and it will be rough to the touch. ”

The flushing method of the toilet, whether the toilet is flushed cleanly or not is directly related to its flushing method. Currently, there are two main flushing methods in domestic toilets, direct flushing and siphon Direct-flush toilets use the gravity of the water during flushing to push dirt out of the toilet trap to discharge sewage. The advantage is that they have strong sewage discharge capabilities; while siphon toilets use the force of the toilet water when flushing. The siphon force generated in the sewage pipe sucks the dirt out of the toilet trap to achieve the purpose of sewage discharge. The advantage is that splashing water is avoided during flushing, and the flushing effect of the cylinder is cleaner.

There are two ways to save water in toilets, one is to save water, and the other is to save water by reusing waste water. Water-saving toilets have the same functions as ordinary toilets, and they must both save water and maintain cleaning functions. And the function of transporting excrement. There are many products on the market with water-saving slogans but the product technology and actual effect are not satisfactory. You need to pay special attention when purchasing.

Test the water-saving performance on the market. Many products on the Internet claim to use a 6-liter water-saving design, but in fact it is difficult for ordinary consumers to distinguish the actual effect. It is recommended to buy well-known brand products. Whether the toilet saves water is affected by two aspects.

Reminder: When consumers purchase a toilet, they need to know in advance the pit distance of the toilet (the distance between the center of the toilet drain pipe and the wall). A large number of products on the market are for 300mm and 400mm pit distances. Consumers need to provide this data when purchasing a toilet. Merchant, avoid model mismatch.

Note:

When choosing a toilet, the color should be consistent with the overall tone of the washbasin and bathroom. In addition, the pit distance must be measured correctly during installation. The error cannot exceed 1 cm, otherwise it will not be installed.

Be especially careful when purchasing a toilet with no glazing and joints in the water tank. If it is glazed, it can only indicate three problems: 1. Low-temperature ceramics are cheap. ; 2. Ceramics have a high water absorption rate; 3. Cover ugliness and cracks!

The choice of glaze is very important, it must be easy to wipe. Let me give you a tip, you will know whether it is good or bad. Use the key Scratch the glaze and wipe it with a cloth to see if it can be wiped off. A ballpoint pen can also be used. If it can be wiped off with toothpaste or washing powder without toilet cleaner, it is a good glaze.

Judging by flushing , the toilets on the market now can be divided into two types: siphon type and open flush type (i.e. direct flush type), but currently the main ones are siphon type.

Measure the pit distance accurately for easy installation. It refers to the distance from the center of the drain outlet to the wall behind the water tank. The error cannot exceed 1 cm, otherwise the toilet cannot be installed. The pit distance of the lower drain method refers to the distance between the center point of the drain hole on the ground and the undecorated wall. Measure the ground distance (referring to the distance from the center of the drainage hole to the finished floor).

Professional reminder: It is best to ask a professional installer to install the toilet. Generally, the specialty store where you purchase it can be responsible for the installation. Install it well. It is best not to move the toilet vigorously within 24 hours. When installing the toilet, do not pour cement mortar into the cavity in front of the toilet or other cavities to avoid cracking the toilet due to cement condensation and expansion.

If the water seal height at the bottom of the toilet is too low, it may cause odor in the bathroom and affect health. If it is too high, the water surface will splash easily, so the manufacturer should adjust the water seal to the appropriate position according to the height required by the individual.

After choosing the appearance of the toilet you like, be sure not to be fooled by the flashy toilet styles. The most important thing is to look at the quality of the toilet. The glaze of the toilet should be clean and smooth, with no obvious defects and no defects. Pinholes and lack of glaze must be detected, the trademark must be clear, all accessories must be complete, and the appearance must not be deformed.