Current location - Trademark Inquiry Complete Network - Trademark registration - How to remove the glue mark on the iron box?
How to remove the glue mark on the iron box?
Tools/raw materials:

Hair dryer, vinegar, polishing water, Erguotou, etc.

Method:

1。 hair dryer

Application: All surfaces that can be heated.

Usage: Blow the double-sided adhesive tape with the hot air of the hair dryer, and it will tear off as soon as it is soft.

Note: some objects can't be heated by a hair dryer, which will make them look different.

2。 vinegar

Application: objects not afraid of corrosion.

Usage: Take a piece of dry cloth stained with vinegar and cover the whole double-sided tape trace. After the sticky stains on the double-sided tape are completely soaked, take a ruler or something and scrape it easily.

Note: vinegar is corrosive. If it is white, don't use it.

3。 Dehydrated water

Application: objects not afraid of corrosion.

Usage: Apply polishing water to the surface of double-sided adhesive tape, and wait for a period of time to easily remove the double-sided adhesive tape.

Note: the exhausted water tastes bad and is not suitable for pregnant women.

4。 wind medicated oil

Usage: suitable for all kinds of surfaces that can't use hair dryer.

Usage: Apply the wind oil essence to the double-sided adhesive mark and remove it later.

Note: Not yet.

5。 Erguotou

Application: Non-cortical things

Usage: Apply the wine to the double-sided adhesive mark and remove it later.

Note: Don't use too much.

6。 eraser

Usage: Objects with small area and smooth surface can be wiped off with rubber.

Usage: wipe in one direction when wiping,

Note: Eraser is not recommended for the special paint surface of polished surface, which will leave many scratches and affect the appearance.

7。 petrol

Application: All objects that will not be contaminated by gasoline.

Usage: gasoline is also very useful, but it will evaporate if it is quick.

Note: but don't have a fire source. Be sure to be safe!

8。 scotch tape

Application: All smooth surfaces.

Usage: Glue it on the surface of double-sided adhesive with transparent glue, and remove it as soon as it is suddenly torn. The remaining pieces are as special as this method.

Note: don't leave any new marks with this.