1. Black dirt at the joints of ceramic tiles. Just a clean brush, toothpaste and a candle. Squeeze a proper amount of toothpaste on the brush and brush the joints of ceramic tiles longitudinally; Then smear the candle on the joint, first vertically and then horizontally, so that the thickness of the candle is equal to the thickness of the tile, and it will be difficult to get contaminated with oil again in the future.
2. Tea stains on the coffee table. Tea is often made on the coffee table, which will leave ugly patches of stains after a long time. You can sprinkle some water on the table, wipe it with tin foil paper in the cigarette box, and then scrub it with water to wash off the tea stains.
3. Fouling on bamboo or rattan. When bamboo and rattan are used for a long time, they often get dirty and discolored. You can scrub them with a soft cloth dipped in salt water, which can not only decontaminate, but also keep the furniture soft and tough.
4. The electrical switch fades. Electroplating switches of electrical appliances are often touched. After being eroded by sweat, they often lose their original luster. You can apply some vaseline to prevent salt erosion.
5. Hot marks on the surface of wooden furniture. If you put the hot cups and plates directly on the furniture, the paint surface will often leave a circle of hot marks. You can dip a rag in alcohol, toilet water, iodine or strong tea and gently wipe it on the hot mark; Or paint a layer of vaseline oil on the scald, and then wipe it with a rag every two days to eliminate the scald.
6. scorch marks on the surface of wooden furniture. Burning products such as fireworks, soot or unlit matches sometimes leave scorch marks on the paint surface of furniture. If only the paint surface is burned, you can wrap a layer of hard cloth on the toothpick, wipe it gently at the trace, and then apply a layer of wax to remove the scorch mark.
7. Residue of self-adhesive on furniture surface. After the trademark on the furniture is torn off, it often leaves adhesive residue, which is sticky and dirty. At this time, it can be wiped with a rough eraser. In addition, gum stains on the floor can also be removed with an eraser.
8. stains on the surface of white furniture. White furniture at home is easy to get dirty, and it is difficult to wipe the stain with a rag only. You may wish to squeeze toothpaste on a clean rag and wipe it gently to remove the stain on the furniture. But be careful not to use too much force to avoid hurting the paint surface.
9. Cracks appear in the floor or wooden furniture. You can cut the old newspaper into pieces, add a proper amount of alum, cook it into a paste with clear water or rice soup, embed it in the crack with a knife, and smooth it. It will be very firm after drying, and then paint it with the same color, and the furniture can be restored to its original appearance.
1. Cleaning of wooden floor. Recommend a method of scrubbing with spoiled milk. Expired milk often goes bad and sour. In fact, it doesn't need to be poured out. It can be diluted with twice as much water, soaked with a soft rag, wrung out, and wiped hard on the floor to make it look brand-new.
11. The odor of the sink. Pour coffee grounds into the sink and then wash them away with water, which can remove the odor and greasy in the drainage pipeline.
Maintenance and maintenance of carpets
Ensure regular cleaning, once every one to two months. If there are stubborn stains on the carpet, professional personnel should use professional equipment to clean and maintain it.
Maintenance and maintenance of marble
In people's daily life, it is inevitable that some soy sauce and vinegar will be spilled on the marble surface, and if they are not cleaned, they will infiltrate, which will lead to discoloration and leave traces forever.
care and maintenance of wooden furniture
don't use hot water cups or some high-temperature objects on the surface of furniture. Put a layer of wax on the surface of the furniture, so that the furniture will look shiny and the surface will not be vacuumed and it will be easier to clean.
maintenance and maintenance of the floor
the floor should be cleaned every day to prevent hard objects from scratching the floor or some small gravel from entering the cracks in the floor. The best maintenance is to apply a layer of protective wax to increase the brightness of the floor and effectively protect the floor.
cleaning of mahogany furniture
if there is dust in mahogany furniture, it can be lightly dusted with a broom or wiped with a soft cloth. It is best to use pure cotton fabric as a rag, lightly wipe off the floating ash on the surface, do not rinse directly with water, do not use a rag that is too wet, and avoid wiping with solvents such as alcohol and gasoline.
For the stains on mahogany furniture that are difficult to remove, vinegar can be used to remove dirt.
mix white vinegar with hot water, wipe the furniture surface with a cotton rag, and then wipe it with a soft cloth to remove it. Oil stains on some hard furniture can also be removed.
in order to keep the brightness of lacquer film, walnut kernel can be crushed and peeled, and then wrapped with three layers of gauze to make oil wipe. After the surface of mahogany is oiled, use gauze to remove oil and polish it. Do not use chemical brightener to avoid the paint film sticking and damage.
how to make the furniture shine again
if the furniture is used for a long time, the surface will lose its luster. how can we restore the original bright and clean furniture? Here are two simple methods:
1 strong tea washing: soak a pot of strong tea, and when the tea is cold, wash the furniture surface with a soft cloth dipped in tea juice to make the paint surface bright.
2 sewing machine oil wiping: use a little sewing machine oil drops on the soft cloth, then repeatedly wipe it on the furniture, and finally wipe it with a clean soft cloth, which can restore the luster of the furniture.
How to use oxalic acid to wipe the rattan products
After long-term use, the rattan products will gradually turn beige, which has its unique charm, but if you want to restore it to its previous white appearance, you can use oxalic acid to bleach it. Oxalic acid is a colorless crystal. Dissolving it in hot water (about a spoonful of oxalic acid in a glass of water) and dipping it in a brush will produce unexpected effects. When autumn comes, in order to change the indoor atmosphere, water-based paints can be painted, which is also quite emotional. When the dust or dirt goes out, paint the depth of the mesh with a small brush, and then paint it along the mesh, which can be successfully completed. That white looks very eye-catching.
When the vine comes loose, first wet it with water, then fix it with iron pliers, and apply a strong adhesive to make it stick.
Maintenance of artificial stone countertops
Maintenance skills:
1 Most stains will not pose a threat to artificial stone
Artificial stone is a solid dense stone material without pores, which has the characteristics of resisting all kinds of stains. Most stains such as food, edible oil, soy sauce, vinegar, alcohol, iodine, lemon oil, lipstick, shoe polish and ink will not pose a threat to artificial stone.
2 daily cleaning
water stains or a small amount of stains can be removed immediately by scrubbing with a wet cloth and adding a small amount of household cleaning agent or soapy water. If it is badly soiled or cut, wipe it with household decontamination powder and tea melon cloth to keep its surface luster.
3 strong stains, cigarette burns or a small number of cuts
Use sandpaper and water to remove stains or cuts, and polish with wax. For more serious injuries, please contact the artificial stone processing factory, which has the skills and equipment to repair the scars.
4. Take on a new look with one heart
Because artificial stone is a solid material, its appearance is the same. After several years, the way to keep artificial stone brand-new is to polish and polish its surface again, which will immediately restore its original features.
Waxing and polishing the wooden floor
Waxing the floor is a measure to protect the floor, which can prolong its service life and achieve beautiful results. Professionals operate the waxing machine and polishing machine, and cooperate with different surface waxes, water waxes and hard waxes for wood floors, composite wood floors, marble and floor tiles. Achieve bright and wear-resistant effects.
Operating procedures for floor waxing:
1. Dust absorption: removing attachments and some adhesives, glue, cement, paint spots, etc. on the floor surface
2. Cleaning: using an electric mop and sauna machine to sterilize and clean the floor, which will not damage the floor
3. Waxing: using different waxes for different floors, and uniformly coating wax & Environmentally friendly wax >
4. Polishing: Professional operation+polishing machine completes
Maintenance of leather products
Leather products are more and more favored by people in modern families, which softens the rigid lines of indoor space and endows the room with a warm style.
For companies, hotels, individuals and other cloth leather seats and curtain walls, stain removal and cleaning are carried out. After a long period of use, leather sofas and chairs are inevitably stained with oil, ink and stains, and the fabric curtain walls of hotels and conference rooms are affected by harmful substances in the air, and their surfaces are stained and discolored, which affects the elegant and beautiful effect. In view of these oil stains, ink stains and stains, our company uses different detergents to locally clean different stains, and then comprehensively clean and blot them. Please use a neutral cleaning agent to avoid corrosive substances on the cloth surface.
renovation of solid wood flooring
renovation of solid wood flooring with the popularity of solid wood flooring, more and more families began to use wood flooring. Different from other floors, wooden floors need to be renovated and maintained after a period of use. Generally, they must be renovated in about 5 years according to the frequency of use. After many years of use, many wooden floors look very poor, and many people will want to tear them down and replace them. In fact, this is not a wise decision. Because the wood floor is just a surface abrasion, the wood is still good wood, especially after years of use, the wood floor becomes very stable. On the contrary, the new wood floor is not as good as the old floor in this respect, and the renovation only polishes the floor with a surface of .5 to 2 mm. Moreover, the renovation of the wooden floor is cheaper than the new floor, which is economical. Operating procedures for renovating floors; Polishing; Use professional equipment to polish the surface and some scratches. From 4 mesh, 8 mesh, 12 mesh sandpaper grinding step by step, so as to ensure that the surface of the floor is fine and smooth. Blow putty; After polishing, be sure to scrape putty to ensure the true color of the floor and the floor will not be scratched. Floor paint; The application of environmentally friendly water-based floor paint will not make the room smell. The floor paint must be a special floor paint, and its wear resistance can meet the requirements of the floor. Maintenance; We use special wood floor wax and equipment for the renovated wood floor.