The steps are as follows

1. First, tear off the trademark label on the bottom or wall of the pot.

2. Secondly, apply toothpaste evenly on the surface of the sticker and wait for a while.

3. Then, wipe it with a soft rag.

4. The bottom of some pots has a lot of stickers and is relatively strong. It cannot be cleaned at one time. Just apply toothpaste on the traces that have not been removed once, and then proceed to steps 1 and 2 above. , you can remove the headache-inducing sticker (or cross-use the soapy wipe in series experience 1).

5. Use a hair dryer to blow hot air against the edge of the trademark for one minute. Use your fingers to gently lift the trademark and tear it off slowly. If you feel there is resistance, use a hair dryer to continue blowing against the torn opening of the trademark. The trademark will be completely removed by you.

Extended information

Stainless steel pots contain a certain amount of chromium alloy elements, which can form a solid layer on the surface of the steel that is not dissolved in certain media. Oxide film (passivation film) isolates metal from external media without chemical interaction.

In this type of steel, some not only contain more chromium (Cr), but also add more other alloying elements, such as nickel (Ni), so that they can survive in the air, water, and steam. It has good chemical stability in many kinds of acid, alkali and salt aqueous solutions, and can still maintain its corrosion resistance even in high or low temperature environments.

Reference material: Baidu Encyclopedia? Stainless steel pot