Siphon phenomenon.

The water tower supplies water. After the water is used up, fill it up and the faucet in your home does not produce water because of the siphon phenomenon. You can open the faucet at the top and then the faucet at the bottom. After reopening, it can be used normally.

However, if the faucet still has slow flow rate or even blockage after reopening, it is usually caused by dirt and blockage. Just clean the filter of the faucet.

Extended information:

If the handle of the water tower water faucet is damaged, there is no need to buy new parts. You can remove the handle screws and replace them with new ones. It should be noted that the screw part is usually covered by the trademark, so you can search carefully.

If the faucet is not closed tightly, you can replace it. The core firmware of the faucet is different from the handle, and the core fixation is for one-time use. When buying a new faucet, you can prepare a roll of special sealing tape for water pipes, and wrap a few more turns of the sealing bag to fix the angle of the faucet.

In addition, the internal fixing materials of the faucet are very thin metal sheets. If you don’t pay attention to the control force when opening and closing, it is easy to break the material sheet. Therefore, when no water is used, it must be cleaned and maintained frequently. Faucet housing. Use a rag to wipe off the moisture on the outer shell and keep it dry to reduce the possibility of rust.