Installation method of vegetable basin faucet
Generally, the installation method of kitchen sink faucet is to embed the valve core of faucet into the wall. Pay attention to the thickness of bathroom wall before embedding. If the wall is too thin, the valve core cannot be embedded. Do not take off the plastic protective sleeve of the valve core easily when burying, so as to avoid damaging the valve core by cement and other sundries when burying. In addition, when you bury the valve core, you should also pay attention to the up, down, left and right directions of the valve core to avoid burying the valve core wrong. When the wall-mounted faucet is embedded in the water inlet pipe, the size is deviated, and the position can be corrected with an adjustable crutch. Before installing the thermostatic faucet, please check whether the water pipe is hot on the left and cold on the right, and remember not to connect the hot and cold water pipes by mistake to avoid the faucet from working normally. Gas and solar water heaters cannot use constant temperature faucets because the water pressure is too low. Please don't forget to install the hot and cold water filter when installing the thermostatic faucet.
Faucets are generally fixed with screws and nuts. Comprises a threaded part which is engaged with the faucet, extends through the mounting hole and can rotate on the platform; The nut is in threaded connection with the threaded part and reaches the lower side of the platform through the mounting hole, and moves towards and away from the lower side of the platform in response to the rotating direction of the threaded part; A second part connected with and parallel to the threaded part, and engaged with the nut to prevent the nut from rotating when the threaded part rotates, so that the nut moves up and down along the length of the threaded part according to the rotating direction of the threaded part; And a locking bracket rotatably connected with the nut.
Recommendation of leading brand of vegetable basin
1, primy (English)
China famous brand, China famous trademark, engaged in the development of kitchen and bathroom products. Zhuhai Pulemei Kitchen & Bathroom Co., Ltd. Zhuhai Pulemei Kitchen & Bathroom Co., Ltd. was established in 1998. It consists of a mold factory, a bathroom factory and a sink factory. It has also established a Pulemei (China) brand marketing management center, a technology innovation center and a product research and development center to make bathroom products of leading international brands.
2. Jiumu Jiumu (Jiumu Group Co., Ltd)
Jiumu Group Co., Ltd., Jiumu Jiumu, top ten brands of faucet-shower, top ten brands of bathroom-sanitary ware, top ten brands of sink-floor drain, national protected trademark, national high-tech enterprise, top 500 most valuable brands in China, leading brand in China bathroom, leading enterprise in China light industry hardware industry, and a large-scale comprehensive bathroom leading enterprise integrating R&D, production, sales and service.
3. Shane CAE (Guangdong Shane Sanitary Ware Industry Co., Ltd.)
Guangdong Xi 'en Sanitary Ware Industry Co., Ltd. was established in 1989, and now it has a professional production factory covering an area of 120000 square meters, with dozens of dual-mode sanitary ware production lines imported from Europe, making it one of the largest sanitary ware production factories in China.
Today, there are so many faucets in the vegetable basin introduced by Bian Xiao. I believe everyone has a certain understanding of the faucet in the dish basin. When choosing the faucet of vegetable basin, you might as well consider these methods introduced by Bian Xiao. In fact, it is not difficult to install the faucet of the vegetable basin, but we suggest that readers had better find a professional master to deal with it to avoid accidents. Readers should also choose big brands when purchasing vegetable basin faucets, and the quality is guaranteed.