Take wires and cables as an example:

3C certification scope of application: the product scope to which this rule applies: 1) rubber sheathed flexible cable for mining; 2) Wire and cable for railway rolling stock with rated AC voltage of 3kV and below; 3) Rubber insulated wires and cables with rated voltage of 450/750V and below; 4) For PVC insulated wires and cables with rated voltage of 450/750V and below, this rule does not apply to GB 15934- 1996 Wire Assembly.

Use of compulsory product certification marks: 3C certificate holders must abide by the provisions of the Administrative Measures for Compulsory Product Certification Marks.

Approved 3C logo style: When 3C certification only involves safety performance, the logo is CCCs.

Use deformed 3C certification mark: This rule allows the use of deformed 3C certification mark. If the product standard requires printing on the surface of wire and cable, the abbreviation CCC (using printing wheel) of "China Compulsory Certification" should be molded, and the font size should be adapted to the overall size of wire and cable products.

Usage: You can use any one of the three ways of marking, molding or printing in the standard specification 3C uniformly printed by CNCA. For wires and cables (such as RXS) that are not required to be printed on the product surface, the compulsory 3C certification mark of the above pattern standard specifications must be affixed on the minimum package of wires and cables (such as per turn 100m).

3C mark position: 3C certification mark shall be added to the outer surface of wires and cables.

Fees: Certification fees shall be uniformly collected by the 3C certification mark issuing management organization in accordance with relevant regulations. See the charge notice for details.

The application for self-printed/molded 3C certification mark shall be handled by the holder of 3C certification certificate according to the following procedures:

1) fill in the application form for printing/molding 3C certification mark (/uploadfiles/20079313137 _ 528. Doc) (Table 1 and Table 2) and affix the official seal.

2) Provide a copy of 3C certification certificate of products with 3C certification mark.

3) Provide nameplate samples with 3C certification logo pattern, factory code and product model. If there is no nameplate, and the 3C certification mark is directly applied to the product body, the design scheme shall be provided.

4) The applicant prints the 3C certification mark on the packaging box, packaging box, packaging bag, certificate, etc. , should provide the design scheme.

5)3C Certification Mark Distribution Management Center shall examine and approve the application for printing design scheme submitted by the applicant according to the following requirements:

(1) The format and content of the nameplate shall be consistent with the nameplate sample submitted when applying for 3C certification;

(2) The pattern of 2)3C certification mark should be linearly proportional to the size of the standard specification certification mark, and the color of its substrate and pattern can be reasonably selected according to the product appearance or the overall design of the nameplate;

(3) Under the 3C certification mark, there should be a factory code corresponding to the product. If the design scheme does not meet the requirements, the 3C certification mark issuance management center shall notify the mark applicant to make amendments.

6) If the design scheme meets the requirements, the 3C Certification Mark Issuance Management Center will issue a charge notice to the mark applicant.

7) 7) The 3C Certification Mark Distribution Management Center will issue a notice of approval for the use of the printed molding mark after confirming the payment. (/ 1236.html).

8) The applicant can apply to the 3C Certification Mark Distribution Management Center to change the printing and molding marks, and the 3C Certification Mark Distribution Management Center will accept new applications.

3C Certification Mark Application (Printing and Molding) Webpage Link /987.html

Contact person: 3C certification mark printing/molding Tel: 021-51095580-805; Fax: 02 1-5 1095580-807.

The holder of 3C certification certificate shall follow the following procedures when applying for purchasing 3C certification marks:

1. Enterprises applying for the purchase of 3C certification marks (standard marks) need to hold the 3C certification certificate or a clear copy of the 3C certification certificate of the applied product, and the 3C certification certificate must be in a valid state before they can apply for the purchase of 3C certification marks (standard marks).

2. The certificate corresponding to the 3C certification mark can only be purchased if it is valid. If the 3C certificate is suspended, revoked or invalid, you cannot apply for purchasing the 3C certification mark (standard mark) for the time being (see 3C certificate validity: /3ccczscx.asp).

3. The applicant must be the full name of the applicant enterprise or the holder of 3C certificate, not an individual. You can refer to 3C certification. Non-certificate applicants who apply for purchasing 3C certification marks (standard marks) must provide the power of attorney of 3C certificate applicants before applying for purchasing 3C certification marks (standard marks).

4.3C certification marks are divided into S, EMC and S&; E, f, I and untyped flags (/1 124.html). To determine the category of the corresponding mark of the product, please refer to the national standard GB of the product and the detailed rules for the implementation of compulsory product certification or call for consultation.

5.3C certification mark size: 3C certification marks in standard specifications are divided into six types: 8mm, 15mm, 30mm, 45mm, 60mm plus and 60mm minus (charging standard: /864.html). In most cases, except for a few products, there is no regulation on the size of the logo attached to the product. If the correct size is not selected, a correction will be required.

6. Fill in the application form for purchasing 3C logo (/upload files/20079314146 _168). Doc)。 The minimum number of units to purchase the 3C certification mark is one version, and the type of the 3C certification mark should correspond to the product (refer to the Catalogue of Compulsory Products, the number of 3C certificate is from 7 to 10). )

7. When applying for the mail order 3C certification mark, the product name must be the corresponding product name on the 3C certification certificate, and the product should be consistent with the 3C certification.

8. If there are too many certificate numbers for one-time purchase of 3C certification mark, you can attach a page at the back.

9. The format of telephone fax in contact information is: country-region-telephone number-extension number.

10. The Application Form for Domestic Enterprises to Purchase 3C Certification Marks must be stamped with the official seal of the applicant. Where the 3C certification mark (standard mark) is entrusted for purchase, the power of attorney of the certificate applicant shall be stamped with the official seal of the certificate applicant, and the trustee shall apply for the purchase of 3C certification mark (standard mark).

3C Certification Mark Application (Purchase) Website Link /864.html

The above rules are implemented in accordance with the Measures for the Administration of Compulsory Product Certification Marks.

Link to Measures for the Administration of Compulsory Product Certification Marks /63.html

Contact information for purchasing 3C certification mark (standard mark): Tel: 021-51095580-805; Fax: 02 1-5 1095580-807.