1. Bending forming mechanism

This site is mainly responsible for the forming of stirrups. Bend the delivered steel bars into the shape we set. The power source of this site is a servo motor. It can bend steel bars in both forward and reverse directions, and can freely control the expansion and contraction of the mandrel, up and down, and change the size of the mandrel.

2. Rapid shearing mechanism

This site is mainly responsible for the shearing action after the steel bars are formed. It is composed of motor and pneumatic brake clutch. The cutting action is completed instantly after receiving the cutting signal. The action is convenient and quick.

3. Vertical straightening mechanism

This site is mainly used to adjust the vertical straightness of steel bars. The roller straightening method is used. Just adjust the depth of each set of rollers to easily straighten the vertical direction of the steel bars.

4. Automatic feeding mechanism

This site is mainly responsible for the wire feeding action of steel bars during the bending process. The servo motor drives two sets of rollers to complete the wire feeding action. The movements are accurate and quick.

5. Horizontal straightening mechanism

This site is mainly used to adjust the horizontal straightness of steel bars. This mechanism is equipped with an automatic feeding device. The cylinder presses the roller forward and backward. The active roller is driven by a motor, and the action of the motor drives the steel bar to be fed.

6. Pay-off rack

The function of the pay-off rack is to store the wire to be processed. It is divided into two types: standard type and reinforced type:

Standard type:

The total height of the pay-off frame is 1600MM, the center diameter is 400MM, the maximum outer circle is 1600MM, and the maximum storage capacity is 500 kg. Wire.

7. Machine operating console

The machine console is composed of a dedicated CNC system and button switches. The CNC system has functions such as automatically generating graphics and counting. The operation interface is more intuitive, user-friendly and easy to operate. Automatic fault identification and alarm functions make it easier and faster for you to maintain equipment. The size of this console is L900*T400*W800.

8. Optional components

Voltage stabilization system:

This system is mainly designed for some areas with unstable voltage. After installing this system, the machine The applicable voltage range

is 300V~450V.

High hardness roller set:

SKD11 roller. Quenching and tempering heat treatment HRC60?±2?.

p>

Heavy-duty pay-off stand:

The total height of the pay-off stand is 2400MM, the center diameter is 600MM, and the maximum outer circle is 1600MM. It can store up to 2500 kg of wire and is equipped with brakes and buffer devices. It can prevent accidental shutdown and causing the pay-off frame to be out of line.