Current location - Trademark Inquiry Complete Network - Trademark registration - How to remove the dirt left after peeling off the tape?
How to remove the dirt left after peeling off the tape?

1. To remove the essential oil, completely soak the area where the tape is stuck with essential oil, and wipe it off with a dry rag after 15 minutes. If the dirt is difficult to remove, you can extend the soaking time of the wind oil essence, and then wipe it vigorously until it is clean.

2. Hair dryer heating offset printing method, turn the hair dryer to the maximum heat, blow on the tape mark for a while, let it slowly soften, and then use a harder eraser or soft rag to easily Erase the offset.

3. Vinegar removal method: dip a dry dishcloth into white vinegar or vinegar, completely cover the area with the label, and make it completely soaked. After soaking for 15-20 minutes, use a dishcloth to gradually wipe away along the edge of the sticker.

4. Lemon juice removal method: squeeze lemon juice onto the hands with sticky tape and rub them repeatedly to remove the marks.

5. Medical alcohol soaking offset printing method: drop some medical alcohol on the surface of the offset printing traces and soak it for a while. Then wipe it off with a soft cloth or paper towel.

Extended information

Removing adhesive:

1. Transparent tape: Use transparent tape to remove without leaving traces.

2. Glue remover: A bottle of glue remover only costs more than 20 yuan. It can be used in many places and lasts a long time.

3. Door tape: Use strong tape to stick some decorations on the door, and then remove it. You can see that there are pieces of glue marks left on the door.

4. Remove the tape: first scrape off the tape with a knife, and then wipe it with petroleum spirit; for frosted glass, scrape off the tape and wipe it with turpentine.

5. Remove trademarks

Newly purchased stainless steel basins or glassware always have some labels attached to them. After the labels are removed, the traces of the stickers left on them are difficult to remove. , wiping with a damp cloth or scraping with a knife will often leave traces. After practice, there are the following methods:

(1) For sticker traces on the surface of hard objects, we can use grease-free nail polish remover Apply it to the surface of the object and then wipe it gently with a soft cloth; these traces can also be removed with denatured alcohol or gasoline.

(2) If these stickers get on the skin, you can also use lemon juice to remove them.

(3) Hand cream can also achieve the effect of removing stickers. Hand cream contains a large amount of water (generally above 70), and the water contains a certain amount of surfactant. Surfactants have good wetting, penetrating, and dissolving abilities, and can quickly penetrate between the sticker and the surface of the object to achieve the purpose of removal. Some similar products, such as facial creams, facial cleansers, and detergents also have the same effect.

(4) For stubborn stickers on the carpet, the best way is to carefully trim off the traces of stickers on the top of the carpet pile.

Reference: Baidu Encyclopedia-Scotch Tape