When buying leather clothes, we should generally choose and identify the varieties, thickness, soft and hard feel, thickness of dermatoglyphics, leather cuts and so on. The pores of cowhide are small and tight, the grain surface is meticulous, and the leather body is full and durable; The grain pattern on the surface of goatskin is semi-circular, and the tile-like grain pattern is composed of 2-4 larger pores on the circular arc. The grain is clear, the three-dimensional sense is strong, and the leather surface is slightly rough. Leather is strong and durable; The grain surface characteristics of sheepskin are similar to those of goatskin, but the three-dimensional sense of grain surface is weak, and the grain surface of leather is thinner, and the leather body is softer and more malleable than goatskin. Pigskin is characterized by large pores and a unique set of triangular lines with three holes. Leather is flexible, more wear-resistant and cheaper than cowhide. Identify the trademark, specification, name and address of the manufacturer of leather clothes, and don't buy products without registered trademarks and manufacturers.

Leather clothes should not be discolored, cracked or pulped, and feel full and elastic. The whole garment should have the same color, no color difference or flower, smooth leather surface and fine grain surface.

Third, we should "touch", "smell" and "look". "Touch" should be soft, plump and elastic, and "smell" should be tasteless. "Look" depends on whether the whole dress is too thin, too loose, shelled and peeled. The overall effect of leather clothing should be thin, thick, full of color and no loose surface, which are the key points of leather quality sensory inspection. The grain surface of leather can be bent inward by 90 degrees, and there will be large wrinkles on the grain surface. After flattening, wrinkles will not disappear completely, which is loose surface. With proper collocation, the smaller the difference between primary and secondary parts, the better.

Consumers can choose the secondary parts of the leather coat, such as the back of the collar, the inside of the clothes or the skirt, dip absorbent cotton in clean water and squeeze them dry by hand, select the part with a length of 10cm on the leather coat, rub it back and forth with wet absorbent cotton for 20 times, and observe whether the absorbent cotton is stained. If the dyeing color is heavy, black or dark gray, it is unqualified.

In addition, high-quality leather garment accessories require high quality. Zippers and buttons are generally high-quality copper products, and leather garment linings are mostly high-quality silk. Quality supervision experts reminded that these details cannot be ignored.