The steps for installing tail and side badges on this type of vehicle are as follows:

1. Open the trunk lid and remove the red area cover on the back of the rear tail light. There are two After removing the screws, the red area cover can be removed.

2. Unscrew the taillight, take out the waterproof glue inside, and unscrew the screws where the taillight is installed.

3. Remove the buckle behind the side label, and then use a flat-blade screwdriver to pry the side label out from the back and forward.

4. When installing, install the buckle first, then align the gap behind the side mark with the two gaps of the rear taillight and press it in.