This system specifies all affairs management procedures of the aluminum profile packaging workshop of the company. This system is applicable to aluminum profile packaging workshop.
2. The content of finished aluminum profile packaging management affairs.
2. 1 aluminum profile packaging workers should absolutely obey the command of quality inspection and monitor, complete their own tasks, and complete the delivery tasks of production technology department at any time. For those who don't obey orders and production arrangements, 50 yuan will be fined every time.
2.2 The color of the same aluminum shall be uniform, and unqualified aluminum shall not be mixed with qualified aluminum for packaging. If it is found that the output of each buckle is 1000kg.
2.3 If the aluminum surface is not clean and the moisture is not dry, the aluminum should be cleaned and dried before packaging. If aluminum is not found according to this requirement, 50 yuan will be punished.
2.4 Before each bundle of aluminum material is packed, the aluminum material should be tied tightly with nylon rope at the position about 1 m from the material head on both sides to prevent the paper from falling out. If it is not tied or not tied as required, each department will be fined 50 yuan.
2.5 When packing, the aluminum spacer paper shall not fall off. If it falls off, it should be repackaged with good spacer paper. Offenders will be fined 50 yuan every time and pay their wages.
2.6 When packaging, the paper roll should be tightly wound, so that each binding material can stand up and the wrapping paper can't come loose. Plastic bags and wrapping paper should not expose the mouth of aluminum. Unqualified, fine 50 yuan, turned over to work.
2.7 Trademark paper should be legible and pasted uniformly. If the trademark paper is not pasted, or the trademark paper is not clearly filled in and pasted irregularly, 50 yuan will be fined for each stab and handed over to the worker.
2.8 Plastic bags should be filled with aluminum of the required size and glued with adhesive tape. Each material is bound with tape at an average interval of four times, and 50 yuan will be fined and paid for each unqualified time.
2.9 transport aluminum into the warehouse, the aluminum per car shall not exceed 60, and offenders shall be fined 60 yuan per car.
2. 10 aluminum cannot be transported into the warehouse by tricycle, and offenders will be fined 50 yuan.
2. 165438+
2. 12 The packaged and unpacked aluminum materials should be handled with care, and do not squeeze or touch the aluminum materials. 50 yuan will be fined for damaging each piece of aluminum.
2. 13 Each bundle of aluminum must be wrapped in paper according to the required number of squares, and no more or less packages are allowed. At the beginning, roll a grid of paper along the mouth of aluminum material, and do not expose the separation paper. On the side without labeled paper, the separator should be shrunk to 10 cm. If it does not meet the requirements, a fine of 50 yuan will be imposed for each prick.
2. 14 When aluminum materials are put into storage, they should be put into storage separately, with care, and aluminum materials should be put in a unified way. It was not put in the wrong place according to the regulations when it was put into storage, and the aluminum material was placed carelessly. Every time it is found, 50 yuan will be fined and turned over.
2. 15 trademark paper, plastic bag and wrapping paper shall be properly kept, and shall not be thrown away or put away at will, and shall not be taken away by others at any time. Anyone who finds out will be fined 50 yuan.
2. During the packaging process of1aluminum profile 6, wastes such as trademark paper backing paper, rubber rope for string wrapping paper, plastic bag paper tube, tape paper ring, etc. should be dumped into the garbage pit, and offenders will be fined 50 yuan every time.
2. 17 When distributing materials, the small bar should be placed between two stools and not littered. After work, the small bar should be neatly placed in the iron frame and then placed on the wall. The useless small bar should be tied and sent to the melting and casting workshop. Every time he doesn't follow the requirements, he will be punished by 50 yuan.
2. 18 During the aluminum profile packaging process, the short paper dropped out should be picked up and wrapped on the aluminum at the first time, and the ground should always be kept free of waste. If it does not meet the requirements, 50 yuan will be fined every time.
2. 19 moved the leftover wrapping paper and plastic bags to the wall and put them away before work, and he fined 50 yuan every time he didn't do it as required.
2.20 Aluminum profile packaging workshop can only use 8 high stools, 2 sheets of paper, 2 sheets of material, separated by paper and tied.
There are four ropes, and 50 yuan will be fined for each extra rope. Before leaving work, put the high stool on the wall and the low stool on the other side. Otherwise 50 yuan will be fined. When the draftsman needs a high stool to dry the materials, the baler should give up. )
2.2 1 Before you get off work, you should clean up the place. 50 yuan will be fined for not cleaning or not cleaning. (Clean the pub once a week on Mondays and Fridays)
2.22 aluminum packers are not allowed to wrap their fingers with tape, and trademark paper can only be sealed with aluminum and cannot be used for other purposes. Offenders will be fined 50 yuan every time.
2.23 The fans used for blowing materials in each shift shall be properly kept, and artificial damage to the fans shall be compensated according to the price. In case of power failure, the fan power supply should be disconnected first, otherwise 50 yuan will be fined every time.