Because the Nike LOGO on the pants is sewn with thread. So to remove the logo, you have to use scissors to remove it.

1. Use scissors to pick up the thread from the reverse side and cut off the thread one by one.

2. After picking out the thread, iron it with an iron.

3. When ironing, remember to put a wet towel between the iron and the pants. So as not to burn your pants.

Extended information:

1. If it is your first time to go into the water after buying it, you need to pour some white vinegar or salt into the water, and at the same time turn the pants over and soak them for about half an hour. Used to lock in the color. Because dark pants are bound to fade a little, and white vinegar or salt can keep the blue or dark colors as original as possible.

2. Turn the pants inside out and wash them by hand in water to avoid unnecessary washing and fading. ?

3. Please do not soak the pants in hot water, which will cause a large degree of shrinkage. The water temperature should be kept below 30°C. ?

4. Use mild detergent. Do not use bleach or any products containing bleach or fluorescent agents. ?

5. If the jeans are not oily or otherwise dirty, reduce the amount of washing powder as much as possible, or even wash them with clean water;.

6. When drying pants, be sure to hang them flat from the waist (use clips to hold them flat, do not tighten them), turn them over to dry, and dry them in a dry and ventilated place to avoid sun exposure, which can easily cause serious injuries. Oxidation discolors or hardens.

Baidu knows - how to wash new pants so that they don’t fade