The domestic counterfeit products of YONEX badminton rackets are generally between 90~ 150 yuan, which is economical at present.
Mostly used for students with poor skills. Although counterfeit badminton rackets are cheap, they are rough in workmanship, poor in feel and short in service life.
Moreover, long-term use is not conducive to cultivating the sense of ball and hand.
The original YONEX badminton racket is characterized by fine workmanship, clear printing and identical rubber particles (protective tubes).
The whole racket sleeve, feather racket shaft, taper handle and chamfered end molded by injection molding are soft to the touch and are all engraved with the words factory.
Number. The racket produced in the early days used to be labeled with square laser anti-counterfeiting trademark, and later it was changed to oval laser anti-counterfeiting dealer.
Label, in recent years, because the laser anti-counterfeiting trademark label is easy to forge, it is difficult for ordinary people to identify the authenticity, and now the laser has been cancelled.
The anti-counterfeiting trademark label is changed to an advanced and hard-to-forge double-photoetching steel number engraved on the conical surface of the handle and racket shaft.
However, counterfeit products are rough in workmanship and fuzzy in printing (such as rackets with shield-shaped PBSI logo, it is especially necessary to check PBSI)
Whether the logo is printed clearly and neatly), the ends of the rubber particles in the line holes are flat without chamfering, and some patties are attached with molds.
The label of counterfeit laser anti-counterfeiting trademark is unclear (mostly oval), and the racket sleeve feels hard without factory number (steel
No.), or it is not a lithography, but a printed fake steel number.
The first thing to understand is the version:?
Often golfers don't know what the stamp numbers CH, JP, TW, SP, etc are. YONEX badminton rackets are marked with. also
Some golfers know that CH stands for China, JP stands for Japan, TW stands for China and Taiwan Province Province, and SP stands for Singapore. But often
I think CH stands for China and JP stands for Japan, but it is not. ?
YONEX badminton rackets are all made in the same place: the high-end models are made in Japan (such as NS9000/8000/7000, AT700,
Bow and arrow 7, bow and arrow 10, etc. ), the mid-range models are in Taiwan Province province (such as MP-29LT, AT 150\MP2 1, etc. ), and some of them are introduced.
Mainland level (such as MP-5). At the same time, YONEX badminton rackets are generally produced according to the sales destination or authorized area.
Different, its products are marked as JP, SP, TW and other versions. For example, all products distributed by China on behalf of Wei Jian are CH versions.
. The material quality of each version is the same. The licensed genuine product sold in Chinese mainland is version CH. The so-called licensed goods, that is, after leaving the factory.
Type A authorized products are sold in Chinese mainland, which can provide authentic inquiry and perfect after-sales service.
Service.
Specifically, it should be identified from the following aspects:
1, overall appearance
The surface of the original badminton racket shaft and racket frame is bright and smooth, and English characters, icons and other symbols are finely printed.
Double photoetching steel grade is clear and distinguishable; But the fake feather racket is not as good as the original one in all aspects, especially the tapered handle.
There is a great difference between the authenticity of the shield-type PBSI logo (because the steel number on the conical handle of the badminton racket ends with CH, TH and TW).
There are different unshielded PBSI signs in different sales areas. )。
2, light etching steel grade
YONEX quill pens and taper handles produced after 1999 are mostly carved by advanced laser technology, which is difficult to copy.
Number (commonly known as double steel number: the number on the handle of the racket is the product series number, and each racket is different; Numbers on the handle
For the product batch number, the same batch number of the same batch of products); However, most counterfeit badminton rackets do not have photoetched steel numbers, and some are printed.
Fake steel grades (please be sure to identify them carefully), and some fake photos are also marked with steel grades, but the font should be carefully distinguished.
There is a certain gap in type, height, width and density, so unfamiliar golfers had better bring real rackets.
Field comparison. Please note that the early YONEX badminton rackets only pressed deeper and thicker strokes on the tapered handle.
Product batch number (commonly known as single steel number).
3, line hole colloidal particles
It turns out that the line hole rubber particles (also called protective tubes) of badminton rackets are injection molded with molds, and the ends have chamfers of more than 30 degrees.
No burr, basically different sizes of rubber particles are used in different positions of the racket frame, and the middle and high-grade feather racket is horizontally fixed.
At the inner position of the cross racket frame, the end of the line hole is V-shaped and turned outwards; The gelatinous end of a pseudofeathered bat
Generally, the part is relatively flat, with sharp edges and no chamfering, which is prone to burr and cracking after a period of use.
Wear or even fall off, and even affect the service life of the feather line. From the thread feeling, it is the most common.
YONEX？
Take BG-65 badminton thread as an example, when threading, I feel that the inner wall of the protective tube is smooth and unobstructed, and the threading is easy and smooth.
The voice is mellow and pleasant; However, when the fake racket is threaded, it feels that the inner wall of the protective tube is rough and the friction is large, which is time-consuming and laborious to wear.
The threading sound is sharp and harsh.
3. Hold the rubber
The original badminton racket handle rubber is thin and soft, and the winding is even, flat and stable. Plastic protective film outside the new racket handle skin
Adopt heat shrinkage technology to seal tightly; The rubber of the fake feather racket handle is thick and smooth, and it is easy to loosen and slip.
Moreover, the plastic protective film outside the new racket handle skin is not tightly sealed, which is very different from the real one.
. In addition, the bar code label on the handle of the fake racket is printed coarsely.
4. Back cover of racket handle
The Japanese letters on the back cover of the handle of the original badminton racket have unique fonts and uniform colors around the letters; And fake feathers
The Japanese letters on the back cover of the hair ball patting handle are rough, and there are traces of white bars around them.
5. Racket sleeves
The original badminton racket covers are diverse in styles, and the badminton racket covers of different agents are different, soft to the touch, and some look YY.
Or the YONEX trademark is also embroidered by computer. In recent years, ball racket covers are generally no longer printed with a single racket model.
, but only the racket series name is printed, such as "TITANIUM, CARBONEX". Most of them are shared by the same series of rackets.
Racket covers, some high-end rackets sold in Japan are equipped with black flannel bags; The fake badminton racket sleeve is basically the same material.
, feel hard, most of them are printed with a single racket model, and the plastic taste is heavy.
Generally speaking, as the world-renowned first brand of badminton rackets, we will take every detail of the products seriously.
From the design and packaging of products to the clear and neat printing of text icons, you can see famous factories.
Style.
Discussion on steel grade identification
YONEX's steel number, also known as laser number and photoetching number, has been fully used in YONEX badminton rackets made after 2000.
The Ministry uses this coding technology, which has the following two characteristics:?
First, the process is laser engraving technology that destroys the surface of paint, which is similar to the surface pattern of mahjong tiles and obvious by hand.
The feeling of concave, the general fake number is simply printed, without the feeling of concave, or pressed to form, the surface is concave and convex.
Rugged (the latter is not suitable for identifying YONEX rackets made before 2000). ?
Secondly, the font of steel number is dedicated to YONEX company, and it has its own design with the banking system, our ID number and so on.
Like fonts, it has become a basic anti-counterfeiting technology. The font is as follows:
Font function description:?
0, both sides are a combination of straight lines and arcs, instead of ordinary fonts with both sides being arcs. ?
1, a simple vertical bar, with no sharp points and no bars at the bottom. ?
2. The stroke in the middle has an arc to the left, like holding the stomach. ?
3. The sharp corner in the middle is very short. ?
4, a horizontal position is very low, and the center of gravity of the word feels very low. ?
5. The head is bigger than the ordinary font. ?
6. The bottom is closer to a circle. ?
7. It consists of straight lines. ?
8. The last lap is a little smaller than the next lap, and the joint in the middle is approximately a straight line. ?
9. Like 0, the line in the right half is a combination of a straight line and an arc.
Third, the meaning of the steel number: the double steel number of the authentic racket consists of the rod number and the cone number, in which the rod number is seven digits.
The number of assembly lines increases one by one, and each genuine racket has a unique corresponding pole number; The cone number consists of six digits.
It consists of two English letters in the format of "DDMMYxPP", where DD= factory date, MM= factory month and Y=
Factory year, X is unknown, PP is the sales area code, so the number should have the following characteristics, 0 1≤DD (factory).
Date) ≤3 1, 0 1≤MM (factory month) ≤ 12. In 2008, you should not see the steel ball racket at Y=9 and X position.
At present, there is no authoritative statement about the quantity, but the most reliable statement is the number of production lines, PP is
Sales area code, common as follows:?
AS-Australia Australia?
BR- Brazil?
BX- Belgium/Netherlands Belgium/Netherlands?
CD- Canada Canada?
China China?
CN/CP- China national team, China national team?
DK- Denmark Denmark?
France? France?
GR- Germany?
Hong Kong-Hong Kong Hong Kong?
ID-India India?
In /IP- Indonesia?
JP-Japan Japan?
KR-Korea Korea?
Ma-Malaysia Malaysia?
NZ- New Zealand New Zealand?
SD- Sweden?
SP- Singapore Singapore (another way of saying South Pacific South Pacific)?
Southwest Switzerland?
Thailand?
TW- Taiwan Province province, Taiwan Province?
UA- United Arab Emirates?
England.-England?
America.-America. America?
There are also some types of steel grades, such as "SPY", whose meaning is unclear, and "DEMO" steel grades are pushed by manufacturers or agents.
Trial rackets are available before the commercial version.
Case article:?
Fake shot 1, model NS9000, font "0" is not straight on both sides, obviously wrong, font size is inconsistent, steel.
1 is very rough in workmanship.
The fake pat 2, model NS9000, is close to YONEX's special font, which shows that counterfeiters have been seriously imitating it.
But there are still many dead ends, for example, the prefix "2" is too big and there are too many joints in the middle of the three words, so there is no way.
There can be a date like1October 27, and the nano series has not yet been listed in 2003.
Fake shot 3, model N8000, steel number font and meaning have been very realistic, and counterfeiters may have mastered steel.
A preliminary understanding of the meaning of fonts, but counterfeiters ignore one point. In 2004, NS series was not listed.
With the current ability of counterfeiting, steel grades can no longer be the only standard to distinguish authenticity, but can only help you keep the first floor.
Pass, identify about 90% of the imitation rackets circulating in the market now, and accumulate them when encountering high-precision imitation.
Get more experience and consult experts.
Illustration:
At present, the racket shaft and the cone at the front end of the racket handle of YONEX racket have the factory number of laser engraving, that is, the double steel number. The serial number of the product is on the racket handle, and each racket is different. The cone is the product batch number, and the products in the same batch have the same batch number. The two English letters at the end of the batch number represent the sales area, and Chinese mainland is ch. Now fake rackets also have steel grades, but some are printed and some are different from real rackets in font details. The early YONEX badminton racket only pressed the deeper and thicker product batch number (commonly known as single steel number) on the tapered handle.
Second, look at the line hole colloidal particles. The real YONEX badminton racket's line hole rubber particles (also called protective tubes) are injection molded by a mold, and the two ends of the line hole rubber particles are chamfered by more than 30 degrees without burr, and basically different sizes of rubber particles are used in different positions of the racket frame. At the inner position of the racket frame where the middle and high-grade badminton racket passes through the hard line, the end of the rubber particles in the line hole is V-shaped and turned outwards. However, the end of the colloidal particles of the fake feather racket is generally flat, with sharp edges and no chamfering, which is prone to burrs. After a period of use, it is easy to crack, wear or even fall off, and even affect the service life of the feather line.
Third, look at the laser anti-counterfeiting label. The laser anti-counterfeiting label of the latest YONEX badminton racket is oval and gold, which is usually attached to the taper of the handle. Under the light, you can see the "YY" sign and the hidden line of the word "YONEX".
Finally, look at the bottom cover LOGO. The white "YY" logo on the bottom cover of the real YONEX racket is not on the same plane as the green bottom surface, but slightly protrudes and can be felt. And the font of "Japan" is very special. Whether it is a LOGO or a letter, the edges are neat and there are no burrs. ?