Carbon fiber papers are all glued. To be precise, they are imitation carbon fiber papers. It is recommended to use a watering can to wet the area to be pasted so that the sticker can be smoothed. Use a hard card to smooth it out. Most people are very confused. It is difficult to make it without bubbles. It is recommended to find a craftsman who can apply the film to make it look better.

If you insist on sticking it by yourself, if you want to stick it well, it is best to prepare the tools: a clean rag, a professional scraper or a credit card will do.

1. Clean the pasting position. If possible, use a fiber-free cloth dipped in 50% alcohol or isopropyl alcohol or acetone to scrub. You can also use soapy water; the surface cleaned by solvent needs to be cleaned. The solvent can be used for pasting after it has completely evaporated.

2. Under normal circumstances, slowly apply it, scrape it with a tool, and remove the backing paper.

3. If the length and width of the sticker are less than 10 cm, you can tear off all the stickers and put them on again. But care must be taken not to accidentally stick or drop it to the ground and collect dust.

4. Use a clean rag or scraper [such as a phone card or credit card] to rub or scrape the film several times until there are no bubbles in the sticker. It is recommended not to expose it to sunlight or soak it in water within 24 hours.