(2). Click on the reverse side of the ID card and scan the reverse side of the ID card. After scanning, the detailed information of the reverse side will be displayed.
(3) Click "Face Recognition" on the real-name authentication page to enter the face scanning page. After blinking and shaking your head, face recognition verification is completed. Note: If the face recognition is too low, you will be prompted "Face recognition failed, please upload a photo of your hand-held ID card", click "OK", and then jump to the ID card upload page. After uploading, click Next to select the business scope.
(4) After the real-name authentication is completed, click Next to enter the selected business scope.
(5). Select the business scope and click Next to enter the bank card binding page. After scanning and identification, it can be modified manually. If bank cards are not supported, you will be prompted to choose the city and bank where you open the account, enter the mobile phone number reserved by the bank, and click Submit.
(6). Enter the credit card authentication page, enter your name, ID number, credit card and mobile phone number reserved by the bank, and click Submit. The system will carry out four-factor authentication, and the registration will be successful after the authentication is passed.
(7). After the registration is completed, jump to the success interface, click the machine binding, and enter the machine binding page.
(8). (Enter the machine serial number and recommender number in the machine binding interface (be sure to fill in). The SN number of the machine can directly scan the sticker on the back of the machine, and click Add. If the binding is successful, the merchant turns on the card, and the POS machine turns on, logging in to the operator 0 1 with the password of 0000.
(9). If the merchant's face recognition degree is too low, it will send a text message to the applicant's mobile phone number, and it can only be used after approval. If approved, the merchant can use it normally. If it fails, you need to upload the merchant information again and re-bind the machine.