Importance of safety, product quality and management.

There is no model essay.

The following is for reference,

Mainly write down the main work content, how to work hard and the achievements, and finally put forward some rationalization suggestions or new efforts.

Work summary is to let the superior know what contribution you have made and reflect the value of your work.

So you have to write a few points:

1, your understanding of the position and work 2, what did you do specifically?

3. How did you work hard and what things did you solve with your brain? Even if it's nothing, write something difficult. How did you solve it through hard work?

4. What abilities or knowledge do you need to improve in your future work?

5. The superior likes people who take the initiative to work. You should make all the preparations in your work, that is, the preparations in advance are as follows for your reference:

Summary is a comprehensive and systematic overall evaluation and analysis of the situation over a period of time, and analysis of achievements, shortcomings and experiences. Summary is a kind of applied writing, which is a rational thinking about the work that has been done.

Basic requirements of summary

1. Summary must have an overview and a description of the situation, some simple and some detailed.

2. Achievements and shortcomings. This is the main content of the summary. The purpose of summing up is to affirm the achievements and find out the shortcomings. What are the achievements, how big, how to use them and how to achieve them; How many shortcomings there are, what aspects they are manifested in and how they are produced should be clearly written.

3. Lessons learned. In order to facilitate the future work, we must analyze, study and summarize the previous work experience and lessons to form theoretical knowledge.

Summarize the precautions:

1. We must seek truth from facts, the achievements are basically not exaggerated, and the shortcomings are basically not narrowed. This is the basis of analysis and learning lessons.

2. Clear organization. This sentence is fluent and easy to understand.

3. Be detailed and appropriate. There are important things and minor things, so when you write, you should highlight the key points. The problems in the summary should be divided into primary and secondary, detailed.

Basic format of summary:

1, title

2. Text

Introduction: overview, overall evaluation; Summarize the full text.

Subject: analyze the shortcomings of achievements and sum up experiences and lessons.

Conclusion: Analyze the problem and make clear the direction.

Step 3 sign

Signature and date.

2. How to improve the safety management and safety culture of cement enterprises?

Personally, I think that the construction of enterprise safety culture can start from several aspects:

First, cultivate the mentality and safety culture of all employees.

1. Safety ideology education: long-term systematic safety awareness education is mainly conducted for all employees, such as ideology, attitude, responsibility, legal system and values, so as to fundamentally improve employees' safety awareness and establish the concept of "safety first".

2. Safety knowledge education: through certain means (lectures, blackboard newspapers, training courses, etc. ) Educate employees on safety production technology knowledge and professional safety technology knowledge, and strengthen employees' awareness of self-protection.

3. Create a safety culture atmosphere: through various forms of safety activities, gradually form a strong corporate safety culture atmosphere and create a safety demand environment.

Second, systematic safety culture education.

1. Establish a strong enterprise safety management mechanism: First, earnestly implement the "enterprise responsibility system", with personnel at all levels implementing their responsibilities step by step, and establishing a horizontal and vertical safety management network; The second is to conscientiously perform the duties of "social supervision", and the rewards and punishments are strict and effective.

2. Establish and improve various rules and regulations: the so-called law enforcement is well-founded. With perfect safety laws and regulations, the safety behavior of employees can be standardized and restrained.

3. Having sound rules and regulations does not mean that you can sit back and relax. You must turn a dead system into a living thought. Through the publicity and education of employees, let them master and accept, and finally form the independent behavior of employees.

Third, conduct behavioral safety culture education for all employees.

Theory should be combined with practice. It is not enough for a person to establish a correct safety concept and master certain safety knowledge. You need repeated skill training to really protect yourself and work safely. It is a means for us to identify hazards and dangerous factors on the spot.

Fourth, the basic training of physical state security.

The whole safety strengthening process should be improved according to PDCA cycle. The elimination of accident risk, system construction, on-site supervision, reliable safety facilities, advanced technology and excellent working environment are indispensable.

Verb (abbreviation for verb) organizes leadership.

Mainly refers to the operation and deployment of safety culture construction, which requires organization and coordination, and unit leaders participate in management, so that safety work can be carried out smoothly and effectively. The construction of enterprise safety culture must be unified and implemented step by step, and a long-term mechanism must be established. By establishing and perfecting corporate culture, we can change employees' thoughts, behaviors and values, and form a positive team atmosphere. On this premise, we should create the safety culture of enterprises, standardize the safety behavior of employees, and make safety management gradually develop towards higher goals such as self-management and team management.

3. Cases of workplace safety accidents

I. 1. Chen Mou is an assembler in the second metalworking workshop of heavy machinery factory, responsible for feeding various processing machines.

On June 3rd, 2005 10, Chen Mou commanded the crane to lift the semi-finished locomotive shaft to feed a machine tool. 2. Chen Mou hung the big shaft by tying a copper wire rope. After skillfully putting on the copper wire rope, he directed the lifting without carefully aiming the rope buckle at the center of the shaft.

After the big shaft was hoisted, Chen Mou pressed one end of the lamp with his hand and followed the car to keep the balance of the crane. It's almost time to feed the machine tool, and Li, the lathe worker, was called, but Li didn't hear it because of the noise.

At this time, the hanging shaft passes through the tail of the machine tool, and the tool table behind the tail of the machine tool is in the way. Chen Mou didn't bypass it in time, the hand of the spindle head broke free, and the heavy spindle suddenly hit the surface of the machine.

Li, who was refueling the guide rail of the machine tool, couldn't dodge, and his left hand was smashed on the bed surface, causing multiple comminuted fractures of the fingers on the back of his hand. The cause of the accident was that single rope was used for large well hoisting. Even if tied in the middle, one end of the crane will be low because of the swing, but it doesn't matter if it is high.

Chen Mou hangs the shaft many times a day, and the rope is often not in the center, so he doesn't think so. He is very careless. Sometimes, because the position of transporting materials is relatively close and the crane is not high, it is directly accompanied by a walking crane.

The feeding position deviated a lot this time, which was not taken into account in the progress of lifting parts. When it is almost in place, it is improper to cooperate with the lathe operator and the crane command is not timely, resulting in sudden detachment, weightlessness of lifting parts, shaft head injury and equipment damage. Precautionary measures 1, it is best to use two-point bolt connection method for hoisting heavy-duty large shafts.

The single rope tying method must be tied in the center and hoisted high to avoid touching objects. When in place, slowly put it down and manually cooperate with the chuck on the rotating shaft.

When holding a crane, it is forbidden to walk with it. 2. Before feeding the heavy machine tool, the rigger and the machine tool worker should greet each other and get ready. In the process of lifting, they should cooperate with and strictly abide by the lifting and handling safety regulations.

On the afternoon of September 1986, 10, a packer in a cement factory was dumping materials. After the machine was turned on, there was no material in the warehouse, so he stood on the screw conveyor, with a steel pipe in his hand, knocking on the bottom of the warehouse. After blanking, the warehouse is ready. Unexpectedly, due to wearing foam slippers, it is inconvenient to move and the center of gravity is unstable. The faulty left foot just stepped into the gap 10cm wide above the screw conveyor, and the running machine twisted its foot and leg.

Stop immediately and turn in the opposite direction, and then take back his legs and feet, resulting in high amputation of his left leg. Reason (2) 1. The packer did not wear protective equipment as required, but walked on the uneven machine in foam slippers, which was the direct cause of the accident.

2. The screw conveyor 10cm wide gap has no cover or protective cover, which is an important reason for the accident. 3. The management of safety production in cement plant is weak, the system is not implemented, and obvious hidden dangers have not been eliminated.

Measures (3) 1。 During working hours, workers must wear labor protection articles according to regulations, and are never allowed to wear slippers to work. 2. The defects and hidden dangers of equipment and facilities must be eliminated. If the gap of 10cm width of the screw conveyor is not necessary for this process, it should be closed; If it is inevitable in the process or operation regulations, safety facilities such as a cover or a protective cover should be put on the upper part to ensure the "intrinsic safety" of the equipment and facilities.

3. Cement plant must strengthen safety management, formulate detailed safety production rules and regulations, and implement full and comprehensive safety education for employees; Conduct regular safety inspections, check the defects and hidden dangers of equipment and facilities themselves, and check the clothing and mental state of personnel; Technical forces must be organized to eliminate defects and hidden dangers of accidents. On June 30, 2000, at 65438, Li and Yang, maintenance workers in the compound fertilizer workshop of a company in Shanxi, were on duty. They carried out inspection and maintenance at the production site, and an attempted accident occurred while refueling the equipment.

The accident happened like this. Li has finished oiling the A filter gearbox, and also needs to refuel the B filter gearbox. He should climb the ladder of platform A first and then climb the ladder of platform B to refuel the reducer B. It's simple. But in order to save trouble and take shortcuts, he insisted on crossing the platform (A and B equipment platforms are 800mm apart). At that time, Li only noticed the platform and didn't notice the upper beam. When crossing, the head of the helmet hit the upper beam, bounced up and fell onto the calcium carbonate belt conveyor running below. At this critical juncture, Yang, a colleague who was overhauling the B filter, found that Yang quickly pulled up the rope switch, stopped the belt conveyor and avoided it.

Afterwards, the factory attached great importance to this near-miss accident, conducted informed criticism in the whole factory, and conducted analysis and discussion among all employees. Everyone wrote down their own experiences and how to learn from the accident. At the same time, Li Yin was fined 65,438,000 yuan for illegal operation, and Yang was rewarded with 200 yuan for emergency parking to avoid accidents. Preventive measures were formulated, such as lengthening and heightening the protective railing of the filtering platform and changing the interval between Platform A and Platform B into an aisle. Although this near-miss accident has passed, it reflects the urgency and importance of improving employees' safety awareness.

First, we must strengthen education. The factory requires leaders and managers at all levels to pay attention to safety with emotion, educate employees from the height of protecting people's lives and safety, take safety as their bounden duty and take rules as the criterion, and standardize the safety behavior of employees entering the site.

The second is to deepen the safety management of on-site walking. That is, take a walk, have a look, check and talk, keep abreast of employees' ideological trends, work emotions and production environment, and eliminate hidden dangers such as thoughts, emotions and environment in time, so that employees can truly "come to work happily and go home safely".

(Analyze the leader's safe production mentality from the "violation psychology" of employees 10) 5. Clothes are not tied. At 7: 35 a.m. on July 29th, 2003, the employees in the sandstone workshop of Dongling Mine were cleaning the post hygiene and preparing for the post handover. Due to the tight production task, the belt conveyor is still transporting ore.

1 1# Wu Haoqiang, a belt operator, cleaned the belt conveyor on his post as usual. In order to get off work on time, he habitually washes all parts of the belt conveyor with rubber hoses, regardless of the fact that the belt is still running.

As he worked, he thought, finish it quickly so that he can go home from work and take a bath, and then go to town to attend the classmate party. When he finishes cleaning the platform on the south side of the belt, the water pipes should converge to the north side of the belt.

At this time,

4. Feelings of scalding accident in cement plant

Time flies, one semester of chemical safety knowledge learning is coming to an end. A semester brings me a lot of feelings.

It makes me feel that any enterprise is safe and lost in the accident. No matter where we are, we should study safety knowledge seriously.

The success of an enterprise lies in safety, and the failure lies in accidents. Any accident is an irreparable loss to the enterprise, and it also causes irreparable pain to the family and individuals.

Safety awareness should always be firmly rooted in everyone's heart, so that everyone knows that if the sense of responsibility is not in place, it will lead to accidents. It is correct to realize that it is not a person's problem, but that you have me and I have you. It is an interconnected, mutually protective and interlocking chain, and it is a complex and closely connected network. Looking back on the recent traffic accidents in our factory, I remind everyone of the importance of safety again and again. These painful cases reflect the lack of safety education, indicating that there are still great defects in the publicity and popularization of safety knowledge, and our safety management system is still so fragile! "Safety is benefit", this view should be rooted in everyone's heart.

First of all, arm yourself, be familiar with the safety system of various operating procedures, and seriously study the relevant laws and regulations on safety; Secondly, develop good habits of safe operation, put an end to habitual violations, and dare to seriously deal with unsafe behaviors around you and even your superiors; Be diligent in inspection, and discover hidden dangers of rectification accidents in time. There are many hidden dangers and dead ends in front-line posts, and habitual violations are common. If we only talk about safety in form and deal with inspection, then even if we invest more and pay more, the safety environment will never be improved in essence, and the safety management level will never be improved in essence! If every employee supervises each other, reminds each other and checks each other in their daily work, finds loopholes and weak links, prevents unsafe factors, eliminates hidden dangers of accidents, and starts from small things, a safety levee can be built.

No danger means security, and no loss means security. Safety means that in the process of life and production, people's lives are guaranteed, their bodies are not harmed, and their property is not lost.

Let everyone pay attention to safety, always pay attention to safety, keep in mind "safety in production", and strictly abide by the chapter of operating rules and the safety production law! Let everyone clearly understand that breaking the rules means going to an accident, hurting yourself, hurting others, and even dying. Don't have any pity, because maybe a small casual violation will cause great harm or loss and become illegal.

If each of us can really realize this, then our work safety will be better, our enterprise will last forever, and we can live happily in a safe and harmonious environment. No danger means security, and no loss means security.

Safety means that in the process of life and production, people's lives are guaranteed, their bodies are not harmed, and their property is not lost. Safety production is the key point of oilfield enterprise management in China, and it is also the fundamental guarantee for our development. Safety is benefit.

If I were a security officer, I would plant this idea in everyone's heart (including myself). First of all, arm yourself, be familiar with the safety system of various operating procedures, and seriously study the relevant laws and regulations on safety; Secondly, develop good habits of safe operation, put an end to habits and violations, and dare to be more serious with unsafe behaviors around you and even your superiors; Three, diligent inspection, timely discover the hidden dangers of rectification accidents.

Perform the duties of safety officer, make a summary and give more reasonable suggestions to superiors; Finally, from wearing a helmet, wearing a seat belt, wearing work clothes and issuing a work ticket, persevere. Front-line workers are the main force of safety production. Without the participation of workers in supervision and management, it is difficult to do a good job in safety production.

When everyone is a safety supervisor, not only do you have to remember the importance of safety production on the day when you are a safety officer, but you should also always pay attention to safety. Even if he is not the safety supervisor, he should keep "safety in production" in mind. If each of us can truly have such a realm, then our work of safety in production will be better. As a safety officer, you should maintain the safety and health of workers with a sincere heart, and create a good production environment for people with safe rules and regulations and thoughtful service.

Since each of our employees stepped into the door of the chemical industry, they began to receive safety education. "Safety first, prevention first", we keep it in mind. We talk about it all the time, study it every week, and shout it every month. Safety work rules have been broken one after another, and safety learning records are thick one after another. So why is the result of an accident analysis "illegal"?

I don't think anyone will have any doubts about the safety work rules, technical operation rules and enterprise discipline regulations. These are the condensation of blood lessons, and everyone is familiar with them. They are three magic weapons for every employee, but why can't they be put into action in the end? Practitioners are at a loss as to what to do. The reason is that they are lucky enough to pass the exam and lose the string of safe production.

There is an urgent need for a safety speech about cement plant.

Speech on safety production in chemical enterprises Author: Safety Culture Network Article Source: Safety Culture Network Number of hits:1915/update time: June, 2007-15 Safety is no stranger to everyone, but it has far-reaching significance for a chemical enterprise.

We are in the front line of production every day, and we are talking about safety everywhere. It brings a bright future for the development of our enterprise, and it also embodies the concern and responsibility of too many people. Every builder of a chemical enterprise can feel the great responsibility. I lived in a mining area when I was a child. The first safety lesson was to see my mother standing in the street anxiously waiting for my father to come home from work on time. Every time my father comes back safely, it contains the deep concern of the whole family, and the figure that my mother is looking forward to has become a memory that can never be erased.

When I grow up, I am burdened with my parents' expectations and my own dreams to enter the special industry of chemical enterprises and become a glorious electrical worker. After taking part in the work, I have heard many examples of safe production and deeply felt the profound significance brought by safety.

Safety means responsibility. A person's safety is not only responsible for himself, but also for his family who care about you. Safety equals benefit, and we can better understand the vitality brought by safe production to chemical enterprises. Over the years, there have been too many safety accidents around me, whether it is to see two colleagues burned by electric arc, their father crushed to death by the explosion of a gasifier, or their aunt pinched to death by the pulley of an oxygen compressor, it is heartbreaking.

The factory held a safety education photo exhibition, which showed pictures of various accidents in brother units. The photos are shocking and terrible. They died in a car accident, were disabled by falling from the sky and were burned by electric arc. A paragraph of text is a lesson written by blood and tears.

Whenever night falls and I look at the neon lights, I will be filled with emotion. This wonderful night scene embodies the hard work and sweat of countless employees, and I also silently regret for some people who will stay away from these prosperous lives forever.

They are like falling meteors in this vast starry sky, only disappearing into people's sight in an instant. After working for many years, I deeply feel that if there is anything equal to happiness, I will not hesitate to answer-safety! Although they are two common words, they are related to thousands of families and each of us, so their weight in everyone's heart is different.

Safety is a long-term, arduous and complicated system engineering, which is not only the weak link of enterprise production, but also directly affects the safety of family. In 2004, I came to Shenmu Chemical Company, a newly-built enterprise. As a monitor, I feel more responsible for safety in production, because I lead a group of newly graduated students.

Looking at their immature faces reminds me of an arc short circuit accident that happened to me when I first joined the work. Although it didn't leave a mark on my face, this blow knocked me back from the edge of the cliff with weak security awareness. I told them a lesson from a bloody case that happened around me. The price paid for the temporary negligence and paralysis of official document writing is often painful. Those lucky people, although they survived the rescue, left irreparable trauma and pain in body and mind.

Learn from a painful experience, learn from bloody scenes, and establish a correct and strong sense of safety. I still remember an article I told them. When a thermal power company was working in a chemical plant, a Japanese expert once said to the constructors, "You China people really have the precious spirit of not being afraid of death, and you don't wear safety helmets at the construction site.

In Japan, factory directors and managers have to wear safety helmets during meetings. "This is a great irony of illegal phenomena.

Hit the nail on the head, it is clear that some people's safety awareness is weak and ignorant, and it is a crime against family and society to despise themselves. The alarm of safety should be sounded all the time, and advise the sad "warriors" to put away your foolhardiness and ignorance! Some people say that the difficulty of safe production lies in ourselves and our own safety awareness.

It makes sense to think about it. Today. Isn't it the efforts and determination of leaders and employees to do a good job in safety production that the activities of "Safety Production Month", the promulgation and implementation of "Safety Production Law" and the strict implementation of "two votes and three systems" are carried out?

Security risks are like a sly fox, hiding, waiting and watching our illegal activities, waiting for an opportunity to devour our healthy lives. "One minute at work, 60 seconds safe", we should all do this.

Every minute of work, we should not only ensure our personal safety, but also ensure the safety of electrical equipment and power grid under our jurisdiction. Everyone knows that the brilliant flowers of youth will bloom brilliantly on the safe fertile soil, and will also become indifferent due to accidental ravages.

Looking ahead, each of us has a long way to go. Under the new situation and new goals, our every move should be more steady and mature.

When we see the bright red sun rising from the ground, golden deserts crisscross ... and every static and dynamic life is rendered vibrant and beautiful. We can't help but sigh: life is so beautiful and wonderful! However, two words are very important, because without them, we can't feel and have this beautiful thing, and that is security! Safety culture network.

6. 200 words a day for a safe.

Case of safety production culture: Starting from the details, every day of safety production background: Frequent safety production accidents have always been a "long-standing problem" in the production and operation of Chinese enterprises.

In recent years, with the expansion of production scale, the continuous improvement of management system and the improvement of management level, the awareness of safety management in production departments has gradually increased. * * The leading group of the General Assembly Production Department of Mint actively implemented the safety production policy of "safety first, prevention first" and formulated a series of accident prevention and control measures.

The employees of the department also actively participated in it, and made contributions to improving the safety production level of the department and the company with strict and responsible work spirit and attitude. Case: Li Li of Class Two, who can't assemble a single screw, is in the process of final installation and debugging of J98 machine, when he finds that one of the five screws originally placed on one side of the machine is missing.

If the screw falls into the middle of the drum or gear, it will destroy the structure of the parts and seriously affect the quality and safety of the products. But the acceptance of J98 is imminent. I don't know where the screws are. What should I do? Li Li's first thought at this time is that the quality and safety of products are the first, and we must give the manufacturer a machine that can pass the quality inspection and produce safely.

He made a decisive decision, removed the cover plate on the surface of the machine, and checked every corner where the screws might fall. Finally, he found the missing screws in the splint of the keg. Case 2: Lee Kwang Gun, the monitor of "Afu" crane who strictly abides by the safety operation rules of crane, is affectionately called "Afu" by everyone. During his 30 years of working as a crane, he strictly abides by the safety operation rules of cranes, effectively achieving zero accidents and zero losses.

On September 29, the Double Festival is coming, and it is a heavy task for the hoisting class to tidy up the workshop workpieces before the festival. It's getting closer and closer to the end of work, and the task has not been completed yet. Everyone's heart is beginning to get a little impatient.

During the inspection, monitor Li found that a crane driver lifted the hoisted object without carefully checking whether the hook and rope were firm before lifting. He hurried forward to stop the worker.

Monitor Li often emphasizes that before using the crane, it is necessary to check whether the hook and rope of the lifted object are firm, otherwise lifting is not allowed. Safety should start from bit by bit and must not be neglected.

Case study: The strict management of the company's leaders, active publicity and training, good safety awareness and strict working attitude of the department employees have eliminated the hidden dangers of accidents around them to the maximum extent, curbed the occurrence of serious accidents and effectively improved the company's safety production level. In the production process, the General Assembly Production Department earnestly implements the policy of "safety first, prevention first", emphasizes that "safety responsibility is more important than Mount Tai", popularizes the knowledge of safety production, and ensures the personal safety of employees and the smooth progress of production activities.