For wall decoration materials, people sometimes choose wood grain paper and sometimes wood skin, but few people know the difference between them; When sticking wood grain paper, in order to prevent wrinkling, there are two sticking methods: wet sticking and dry sticking. What are the specific steps? This is the main content we want to share with you today. Let's have a look.

The difference between wood grain paper and wood veneer: anti-wrinkle method of sticking wood grain paper

The difference between wood grain paper and wood skin;

1. Wood grain paper, also known as Bao Li paper, is a kind of decorative paper, which is mostly used for surface treatment of plates. After pasting the board, it needs painting treatment. Wood veneer is a semi-natural decorative material.

2. The pattern on the wood grain paper is printed; The pattern on the veneer is the pattern of the high-quality wood itself.

3. The thickness of wood grain paper is generally 0.5 ~1.0 mm; Veneer thickness is generally1.0 mm ~ 2.0 mm ~ 2.0 mm. ..

4. Wood grain paper can be used as the surface layer or decoration of decoration, furniture, etc. According to different materials; Wood veneer is mainly used as surface layer in high-grade decoration.

5. Wood grain paper is generally cheap; Most wood skins are more expensive.

6. There are many wood grain paper products in China; Most precious tree products can only be imported.

Anti-wrinkle methods of wood grain paper;

First, wet paste

1, measuring the size of the pasted object;

2. cut the sticker;

3, pre-pasting, measuring whether the size of the cut sticker is appropriate, and trimming;

4. Spray liquid on the pasted object with a hand-held watering can;

5. Remove the protective layer of the sticker completely, cover the sticker on the pasted object and flatten it (quickly);

6. Scrape off excess liquid and gas with a scraper;

7. Wait, it will take about a day.

Second, dry paste

1, the sticker size has been determined in advance;

2. Choose two points on the sticker, which are the longest distance of the sticker;

3. Uncover the protective layer of two points, about1cm-2 cm;

4. Fold the uncovered protective layer from the edge of the label. "Outside" is very important;

5. Stick the sticker on the pasted object. In fact, only those two points are stuck:

6. Pull the "outer" protective layer along the direction of the sticker, and press it while pulling;

7. finally poke the needle and press the bubble. It's done.

The difference between wood grain paper and wood veneer: anti-wrinkle method of sticking wood grain paper

That's the introduction of the wood grain paper I brought to you today. I believe that friends have a certain understanding. I hope this article can help you. You can also log in to view and subscribe to more related content and information.