Current location - Trademark Inquiry Complete Network - Futures platform - 20 18 semi-annual work summary of comprehensive post of risk control department: 20 19 personal work plan
20 18 semi-annual work summary of comprehensive post of risk control department: 20 19 personal work plan
In a blink of an eye, it has been nine months since I entered that period. In fact, September is neither long nor short. But it gave me a deeper understanding of the company, and also helped me improve my business skills through my own study, leadership and colleagues' education, and I was more competent for what I was doing. Now I am a comprehensive post in the company's risk control department. With the educational care of leaders, the help of colleagues and personal efforts, I have successfully passed the initial maladjustment period by reading relevant books and interpreting relevant documents and regulations of the company, and now I have quickly integrated into the leading role of the approval team.

From 20 18 1 10 to 2018 on June 30th, our company held 49 loan review meetings.

A total of 77 loans and commercial bills were recovered, totaling 220,535,438+0.46 million yuan, including loans 1 1 pen, totaling 7302 1.029 yuan; 66 discounted commercial tickets were recovered, totaling 1475 1.5438+0246 million yuan.

Loans and commercial tickets 108 were issued, totaling 233,055,367 yuan, of which loans 18, totaling 654,380,040 yuan; Discount 90 commercial tickets, totaling13265366700 yuan.

Accumulated warehousing files 6 1 volume (element b) and C) 13 volume (element c), and settled and filed 7 1 volume. Put in five secret files.

The above is the statistics of my half-year work in 20 18. How to improve work efficiency and better fulfill work requirements is a problem that I often think about. Strengthening the study of various documents and systems is the most basic requirement for my post; Participating in various regular and irregular special training, regular meetings and study meetings organized by industries and departments will improve my professional quality in an all-round way. I also attend the regular meetings and study meetings of the department, learn the spirit of the document and put it into practice. Personality is sometimes invited to the relevant departments of the industry to explain the difficulties in the business on the spot, which is a good opportunity for me to learn. Only by learning the system, understanding the system, doing things under the requirements of the system, mastering all-round knowledge and understanding policy changes and industry risks can we become a qualified professional in the post of examination and approval group. The times are changing, the environment is changing, and the work of banks is changing from time to time. Every day something new appears and something new happens, which requires me to change with the situation. Learning new knowledge, mastering new skills, adapting to the changes in the surrounding environment, improving my post-holding potential, cultivating myself as a comprehensive xx bank employee and planning my career better are my efforts. Of course, I still have some shortcomings in handling and operating some details. I will hone myself in my future work and study, improve myself with the guidance and help of my leaders and colleagues, give full play to my strengths and make up for my shortcomings.

20 18 summary of work in the first half of the year

Liu anqiang in comprehensive mining area

How time flies! In a blink of an eye, 20 18 has already passed halfway. Looking back on my six months working in Caojiatan, I have made great progress in all aspects under the careful care and guidance of leaders and colleagues. Summarizing the experience and lessons in the work is conducive to making full use of strengths and avoiding weaknesses in future work and doing a good job. The following is a summary of my personal work in the past six months, please give me guidance and correction:

I. Summary of Work in the First Half of 20 18

The first stage: 65438+February 23rd to March 6th.

1, training practice in Hongliulin No.1 fully mechanized coal mining team. Through underground field practice and ground organization training discussion, I mainly learned the coal mining technology of large mining height working face in northern Shaanxi, mastered the supporting electromechanical equipment and its control system of fully mechanized coal mining face, learned the basic operation of equipment and the judgment and treatment of common faults, and learned the system debugging of intelligent coal mining face.

The second stage: March 7th to March 3rd1.

1, lead the team to clean up 122 106 the silt coal and sundries in the auxiliary transportation lane, auxiliary inclined shaft, auxiliary transportation lane and main transportation lane, do a good job in on-site safety monitoring and daily management, and be familiar with the roadway layout of the underground system.

2. The assembly and debugging of fully mechanized mining equipment in the ground workshop mainly cooperated with the installation and debugging of Aikefu shearer, hydraulic support of coal steamer, Zhangjiakou, pumping station and various electrical switches in Shennan moving center, and the ground joint trial operation was successfully completed on March 29th.

Stage 3: April 1 to May 3 1.

1, participated in the knowledge training of shearer electrical system, electro-hydraulic control of hydraulic support, shift transformer, combined switch and other related equipment, and was familiar with the field operation, daily maintenance and basic troubleshooting of the equipment.

2. Lead the team members to clean up the sundries in 122 106 auxiliary transport gateway and main transport gateway, and complete the drainage work in auxiliary transport gateway and cutting.

3. Be responsible for 122 106, tracking the installation progress and quality acceptance of auxiliary transport gateway support vehicles and working face equipment, and reporting the problems existing in the installation process for rectification.

4. Complete the sorting of sundries such as pipes, belt racks, rollers, etc. in the south square of the fully mechanized mining equipment warehouse on the ground, as well as the leveling of roads outside the mining area and garbage cleaning.

5. Organize the staff of this class to complete the compilation of accident cases, statistical reports of material planning and other temporary tasks arranged daily.

Stage 4: June 1 to June 30th.

1, cooperate to complete 122 106 summary of relevant information such as modification, approval, implementation study and assessment of working face operation procedures.

2. Assist teams to complete 122 106 auxiliary transportation gateway drainage system reconstruction, road surface leveling, roadway debris cleaning, etc.

3, write the comprehensive mining area post emergency disposal card, modify the working face operation procedures, summarize the main problems existing in the working face and other daily temporary matters.

4. Cooperate with the installation and debugging of 122 106 working face equipment, communicate and coordinate with the personnel of various manufacturers, departments and moving centers every day, and check and deal with the electromechanical problems existing in the installation process one by one to ensure the normal operation of the equipment.

Second, there are shortcomings.

1, there are many electrical equipment control systems in the working face, and the equipment is not well coordinated. It is necessary to collect and sort out various drawings, communicate with colleagues and manufacturers, and strengthen the combination of theoretical study and troubleshooting practice in future work.

2. The failure of electrical control system of shearer can't be judged and handled quickly, which is mainly caused by incomplete knowledge of electrical control of shearer, incomplete mastery of drawings and lack of experience. It is necessary to strengthen the study of the electrical control system of shearer in spare time, with the emphasis on familiarizing with the circuit diagram of shearer and quickly troubleshooting electrical faults.

3. The existing inverter in the working face is very different from the inverter I contacted before. At present, there are many problems among shift transformer, frequency converter, ABB and Huaning control, and they are relatively weak points because of frequent start and stop. It is necessary to strengthen the research on inverters from two different manufacturers: conveyor, reprint machine and 1 emulsion pump.

4, the sense of responsibility in the work is not strong, can not play an exemplary role, lack of management experience, improper methods in daily work, dare not boldly perform their duties. We should make more efforts in daily management, communicate more, and do a good job in on-site safety monitoring and daily management.

Three. 20 18 work plan for the second half of the year

1, gradually master the knowledge of related business skills of fully mechanized mining face, never escape when encountering problems in work, humbly ask leaders, colleagues and experienced masters, earnestly sum up experience, overcome shortcomings, and constantly improve their professional quality.

2. In case of mechanical and electrical equipment failure in the production process, coordinate with the manufacturer to eliminate the failure in time, and compile the main elimination methods into a book.

3. The workers in the comprehensive mining area should strengthen the exchange and training of knowledge about weak technical links or new equipment and new technology, and constantly improve their ability to analyze and solve practical problems through on-the-job training, technical competitions and mentoring.

4, do a good job in the daily management of electrical materials and accessories, improve the statistical classification management of spare parts, and timely report the material plan as required, and at the same time do a good job in sorting out all kinds of information of the district team.

5, conscientiously do every little thing, on the premise of ensuring safety, all work is aimed at completing the task of raw coal production, and strive to make unremitting efforts to build Caojiatan into a smart mine.

Liu anqiang in comprehensive mining area

2065438+July 5, 2008

First, personal work summary

1. The original design scheme for the wall surface of public parts is mixed oil gypsum board, which is inconsistent with the contents of the sales contract and there is a risk of delivery complaint. After communicating with the company's design department, it was finally decided to adopt wall brick construction.

2. Indoor electrical pipelines are mostly embedded, and a few are exposed, which greatly reduces the construction time of exposed pipes in fine decoration projects. The power pipeline controlled by floor heating and air conditioning is embedded by the general contractor, which reduces the phenomenon that the shear wall is damaged by slotting in the later stage, and there are many subcontractors in the embedding stage, and the progress of the working face is small, which leads to the lag of subcontractors.

3. The benefits of electrical pipeline pre-embedding and secondary pipeline construction by the general contractor of hardcover acceptance project. After the completion of the intermediate inspection, the general contractor has never made a claim for the pipeline schedule delay that affects the painting period. It is suggested to carry out secondary piping on the wall before the intermediate inspection, so as to advance the intervention time of painting and save a certain time limit for a project.

4. Marketing colleagues suggested that there should be a gap between the connected switches after installation. Before construction, the supervisor and the fine decoration unit should be organized to measure and define the embedded spacing of the bottom box, so as to improve the look and feel of the switch after completion. 5. Earnestly implement the sample work. First of all, all the work needs to be set up before the construction. Three sets of pipeline model houses are set up for large-area fine decoration pipeline construction, and various functional departments are invited to inspect according to the company's requirements to avoid large-area rework, which also lays the foundation for the smooth development of the follow-up work. Specify the acceptance criteria of the supervisor.

6. According to the actual situation, the specific scope of the real-life model area and the progress of implementing the landscape unit were planned after being approved by the leaders.

7. Organize fire-fighting units to deepen BIM for all integrated pipelines in the basement, and carry out subsequent construction accordingly to reduce rework caused by incorrect construction space and location.

8. Considering the construction thickness of floor heating, it is required to increase all waterproof casing by 5cm in the embedded stage to ensure that the finished surface is higher than the ground.

9. Due to the common leakage phenomenon of gas riser in previous projects, the general contractor is now required to be responsible for repairing the hole of gas riser casing.

10. It is pointed out that street lamps and landscape street lamps in lighting engineering have different electricity consumption properties and need to be unified.

165438+

12. In the tender for fine decoration, remind the cost department of the missing items in the insulation list and the conversion between the size of ppr pipe and DN shown in the drawing.

13, requiring the general contractor to complete the civil engineering conditions in advance according to the requirements of the elevator unit.

14. Organize the wall renovation office to accept the wall, and refund the wall renovation fee in time according to the document requirements (half of the deposit can be refunded in advance for pc projects), and the fee has been refunded to the company account.

15. Arrange the fine decoration unit to conduct self-inspection on the embedded box, and report it to the supervisor for acceptance after completion. Focus on: 1. Whether the box is constructed according to the drawing size, 2. Whether it is aligned up and down, 3. Whether it is aligned with the ash cake, and 4. Is the box empty?

16. Invite material suppliers to make disclosure on ppr pipeline construction technology and matters needing attention.

17. It is stipulated that the fine decoration unit needs photos to be fed back in time for pressure test and water conservation, so as to facilitate inspection and keep abreast of the dynamic progress. 18. When preparing the technical objectives, we avoided the problems that will happen in the past and reduced the cost of the later contact table as much as possible.

Second, the existing shortcomings and improvement measures

1. After Mr. Zhu's reminder, I found that I did have some problems in language wording when communicating with suppliers, so I need to pay more attention to my manners in communication.

2. Ask more professional knowledge from colleagues, improve your professional ability, and make yourself an expert and versatile, so as to make yourself strong and meet the needs of the company's development.

3, enhance their forward-looking and planning, so that all the work can be foreseen, try not to have problems, and deal with problems in an orderly manner.