I. Introduction of Intelligent Lighting Module
Intelligent lighting module is an executive module in intelligent lighting control system based on bus, which is divided into intelligent lighting switch control module and intelligent lighting dimming control module. All the load lines that need to control the loop are pulled back to the intelligent lighting distribution box and connected with the executive module, which is connected hand in hand through the bus and managed by the intelligent lighting gateway host. It can realize switching, dimming control, single channel control, multi-channel scene, timing control, induction control and other functions.
(1), function
1.6 loop output control, each through the current 16A, each loop function switch operates independently.
2. Terminal interface connection 2.5? Line, straight line goes straight in, without turning and changing lines.
3. Plug-in terminals are used for communication and power interface.
4. The CPU chip of intelligent lighting module is imported from abroad.
5. There are 6 manual buttons on the panel of intelligent lighting module, which are used to manually operate the cycle function.
6. The installation wiring size of the module is the same as the six leakage switches of Zheng Tai 1P, and the node wiring is the same.
7. Intelligent lighting module has built-in Y-BUS interface, and module communication adopts CAN communication mode.
(2) Working mode
Manual operation: The panel of intelligent lighting module is designed with 6 buttons, which can turn off the lights manually.
Automatic operation: The black button on the panel is a manual automatic switching button. After the system sets the program, press the black button to complete the automatic operation.
Panel operation: multiple intelligent lighting modules are controlled by the panel. After setting the module station number on the panel, there are 32 scene modes to operate.
System operation: the intelligent lighting module in the building is connected in series to the terminal and operated by the lighting system.
Second, the use effect of intelligent lighting module
1. Time control of intelligent lighting module
The intelligent lighting module sets the on and off time in the system, and automatically turns on and off the lights after reaching the set time. Time control is accurate to set different opening and closing times for each loop of the system, and the time setting range is accurate to every second.
2. Automatic control of intelligent lighting module
When selecting automatic control, the automatic function must be linked to the intelligent lighting module or system. After setting the time of time control, the hook automatically controls the function, automatically turns on and off the lights at the set time, and automatically circulates every day. In a festival, you can choose a day without a cycle to cancel the automatic opening and closing function of the selected festival.
3. Fire fighting function
When there is a fire in the electrical control of the building, the fire-fighting function will sense the fire through the fire-fighting sensor and automatically turn off the power supply to prevent the wires from catching fire.
4. Intelligent lighting module in system control
The communication interfaces of all intelligent lighting modules in the building must be connected to the system terminal with twisted-pair shielded wires. After the terminal is installed, the lighting system of the whole building is completed. The terminal is installed in the control room, and the electronic control department of the whole building uses intelligent lighting modules to control in the control room.
Working principle of intelligent lighting module
The working principle of intelligent lighting dimming module is to connect: intelligent panel, intelligent lighting module (switching value, dimming, dimming and incandescent lamp, fluorescent lamp, LED lamp, etc. ), illumination sensor, infrared control, etc. Control input devices and output devices in the network. Any smart panel can be programmed to control any lighting circuit, scene mode and other functions. The traditional lighting realizes the on-off control of the lamp by controlling the on-off of 220V through the common wallboard, and has no dimming function and scene function.
The above information is mainly about the multi-plate knowledge of intelligent lighting modules, such as the functional advantages and characteristics of products from the consumer's point of view, and more practical knowledge information: the purpose and effect of intelligent lighting modules, which is convenient for friends who are interested in buying but don't know much about it, and further determines the appropriate solution products to ensure the later effect and advantage experience. Of course, combining with reality is also a key factor that cannot be ignored.