What if leather clothes are stained with foaming agent?
The solution of leather clothes sticking foaming agent;
1. Add two-thirds of the paper cup-Lycrain-to water, soak the leather coat for 5 minutes, and then gently press it by hand. At this time, dirty water came out. If less dirty water comes out, rinse it once. If too much dirty water comes out, rinse it 2-3 times. Then put it in a net bag, dehydrate for 3 minutes, and finally put it in a ventilated and cool place, where it is naturally dried.
2. If you just spray it on your body, don't squash it and don't use cleaning agent, because the contact surface between styrofoam and clothes is the smallest at this time. Spray some misty water on the recycled styrofoam, let it dry quickly, and it will be easy to pick it off after drying. It is strongly recommended not to use detergent, because it can dissolve styrofoam. Once dissolved, the foaming agent will be more closely combined with the clothing fibers, and the clothes will be more economical.
Cleaning method of leather clothes stained with foaming agent
Leather clothes are stained with foaming agent, so it is difficult to wash them with soap or gasoline.
When the foaming agent is wet on the cloth, it can be wiped with cotton swab or soft wool dipped in turpentine or benzene solution, then with soap solution, and finally with water. If the foaming agent has dried on the cloth, it can be wiped with a mixture of turpentine and ether, with gasoline, with soap, and finally with clean water.
Matters needing attention in leather clothing cleaning
1, cleaner selection
There are many kinds of cleaning agents, including mixed solution of ammonia, alcohol and water or weakly alkaline cleaning agents. These two cleaning agents are simple to make and low in cost. If you think it is troublesome to do it, you can buy professional cleaners directly in the supermarket.
2. Cleaning method
First, carefully wipe off the dust on the surface of the leather coat with a wrung wet towel, then apply the cleaning agent evenly on the surface with a sponge or brush, and stay for 2-3 minutes, and finally wipe it repeatedly with a wet towel.
3. Backlight drying
After the leather coat is wiped clean, it should be put in a cool and ventilated place to dry. If exposed to the sun, it is easy to crack and shrink. Personally, I suggest that leather clothes should be sent to professional dry cleaners if possible, and the cleanliness is guaranteed.
How to choose leather clothes
1. Leather: Leather is soft, free from defects, uniform in color and no obvious color difference. Whether the fur is shiny and the color is harmonious. If you touch the fur carefully, you should be able to feel the softness and firmness of the bottom hair, and the needle hair is smooth and soft, not rough and hard. Fur clothing
2. Sewing: The stitches should be straight and tidy, without jumper wires and pinholes exposed after modification, and the hem should be straight.
3. Accessories: the button is in the right position, with good firmness and no defects; The lining should not be too long or too short; Pocket sewing fastness is good; Trademark and size identification are correct and clear.
4, fur collar: fur quality is good, gun hair is smooth, left and right symmetry, color and leather clothing coordination.
5. The difference between genuine leather and imitation leather: genuine leather has a special skin flavor, and there will be a little difference in color and texture; Imitation leather has a plastic taste and feels sticky, and the texture pattern is just a regular simple repetition.
6. Be sure to try it on, so as to feel whether the weight of the clothes is appropriate.