1. Select the installation location of the pipeline machine: the installation of the pipeline machine must match the water purification products; When selecting the installation location of the pipeline machine, ensure that it will not affect other daily operations of users; Pipeline machine and pipeline installation must avoid direct sunlight; Try to avoid installing it near wooden floors or valuables.

2. Mark the installation position of the pipeline machine according to the previous step, then punch holes with an electric hammer, and fix the hanging plate on the wall with expansion screws.

3. Installation of water inlet pipe of pipeline machinery

Turn off the power supply of the water-making machine and the ball valve of the pressure barrel, then cut the pe pipe connected between the clean water outlet of the water-making machine and the gooseneck faucet with a special pipe cutter, connect it to the water inlet tee standard of the machine according to the actual situation, and connect the 2-point PE pipe separated from the tee to the water inlet at the bottom of the machine.

4. Function debugging of pipeline machinery.

Turn on the power supply of the water-making main machine and the ball valve of the water storage bucket, and turn on the power switch of the pipeline machine main machine to replenish water to the machine. Turn on the heating switch of the machine after the water supply lamp goes out and water flows out of the hot water outlet. At this time, the heating lamp flashes. When the heating lamp goes out, pressing the hot water button indicates that the heating function is normal.

5. Drain the first two cans of water heated by the pipeline machine.