1. Shanghai Lima electric vehicle has good quality: Shanghai Lima electric vehicle has good quality and good user reputation. On the basis of ordinary bicycles, Shanghai Lima Electric Vehicle is equipped with motor, controller, battery, handlebar and other control components and electromechanical integrated display instrument system.
2. After-sales service of Shanghai Lima electric vehicles: The quality problems of Shanghai Lima electric vehicles can be guaranteed in the after-sales service stores of Lima electric vehicles all over the country, and any quality problems of electric vehicles can be exchanged during the replacement period.
Extended data:
Shanghai Lima electric vehicle was postponed;
1. The screws and nuts fastened to the bicycle shall be tightened, and shall not loosen or fall off.
2, rotating parts should be flexible operation, can not have stuck, stiff phenomenon. For example, the front and rear wheels should rotate flexibly, and they should not swing from side to side or jump up and down. When they are about to stop, the wheels should be able to swing back and forth briskly and should not suddenly stop turning. The handlebar should rotate freely from left to right, and the pedal shaft and crank should be fastened, and they should not loosen each other and rotate flexibly.
3. The shift position of the gearbox is correct within the shift range, and the shift position should be clear with no gap in the middle.
4. The chain should be elastic and flexible. Shake the crank sprocket back and forth repeatedly by hand, the chain can run flexibly, and there can be no chain jumping or falling.
5. Hold the front and rear parts of the saddle with both hands, and press down the front end of the saddle with one hand. The front end of the saddle should not collapse. Then turn the saddle horizontally with both hands. Do not turn the saddle.
6. Selection of braking and braking system: Hold the handlebar with both hands, brake left and right respectively, and push and pull the bicycle back and forth at the same time. At this time, the wheels should not turn; Loosen the handle and the braking system should be able to reset quickly.
7. The surfaces of all parts shall be clean, free from stains and rust, and the trademark decals shall be complete and clear, free from sharp edges and burrs. There shall be no tingling at the edges such as mud pieces and chain sleeves, and the ends of steel wire ropes such as brakes shall be provided with protective sleeves.
8. Observe the brand or label of the parts. Generally speaking, good parts are marked with obvious trademark marks and the patterns are clear and exquisite, while inferior products are rarely marked or rough.