□ Basic treatment
The base should be dense and free of floating ash. If the wall is loose or smooth, it is necessary to use "JT500 wall plugging" for interface treatment, or do cement roughening.
□ Tile treatment
Soak the tiles in water for a few minutes, and then take them out to dry in the shade.
□ Mortar ratio
108 The glue should be diluted with water according to a certain proportion before use, and should be fully stirred before use. Suggested proportion: 108 glue: water = 1: 2. The consistency of cement mortar should meet the construction requirements.
□ Construction matters
Apply cement mortar on the ceramic tile for leveling and compaction, and the mortar thickness is 5 ~ 7 mm..
□ Implementation standard
Technical standard: JC 438-91; +0; Environmental protection standard: GB 18583-200 1.
□ Construction temperature
The construction environment temperature is higher than 5℃. The construction curing temperature is above 0℃.
□ Storage and transportation
Store in a ventilated, dark and dry place at room temperature not lower than 5℃, and the shelf life is 12 months. Products are non-toxic and non-flammable, and storage and transportation can be handled according to the rules of non-dangerous goods.