How to remove offset printing

Methods/steps

1. Remove offset printing with nail polish remover

This is the most effective and consistent method I have ever used. method in use. No matter how long the "history" is or how large the area of ??offset printing is, drop some nail polish remover that girls use to clean nail polish, soak it for a while, and then wipe it with a paper towel to ensure that the surface of the item is as clean as new. But there is a problem. Because nail polish remover is highly corrosive, it cannot be used on surfaces that are afraid of corrosion, such as painted furniture, laptop casings, etc. (Although the offset printing was very clean when the author used this method for the first time, However, the paint surface of the notebook casing was greatly damaged, and some nail polish remover flowed into the inner casing of the computer, causing the inner casing to be corroded). Therefore, although nail polish remover is effective in removing tape traces, you must pay attention to protecting the items with traces from corrosion.

Scope of application: Offset printing has been on the surface for a long time, has a large area, is difficult to clean, and is not susceptible to corrosion.

2. Use the hair dryer to heat the offset printing

Turn the hair dryer to maximum heat, blow on the tape mark for a while, let it slowly soften, and then wipe it with a harder eraser or soft rag. Lose.

Scope of application: Suitable for items with relatively small tape marks and long offset printing, but the items must have sufficient heat resistance.

3 Medical alcohol soaked offset printing

Drop some medical alcohol on the trace surface, soak it for a while, and then wipe it off with a soft cloth or paper towel. Of course, items with tape traces must not be afraid of alcohol corrosion. Similarly, if you have essential oil, expired perfume or astringent lotion, you can also use it to replace alcohol, because there is a certain alcohol component in it, and these two can be applied to any item, after all, the alcohol in it The content won't be too much.

Scope of application: Surfaces of items that are not easily corroded.

4. Eraser to erase offset printing

I often used this method when I was a child in school. I wipe it with an eraser. The eraser scraps can just stick off the adhesive traces

Scope of application: It is used for small area and new traces. It is futile for large-area tape traces.

5

5 Computer cleaners to erase offset printing

The cleaners usually used to wipe camera lenses and computer screens can also be used to erase tape traces.

Scope of application: Very effective for tape printing on smooth surfaces.

6

6 Time-saving and labor-saving "glue remover"

Also called "sticker remover", it is sold in some auto parts stores , spray the traced area and it will be wiped off quickly.

Scope of application: Large areas of offset printing that are difficult to remove, but if you don’t often encounter tape marks, there is no need to buy a bottle. Just use the author’s little trick.

How to remove offset printing

How to remove offset printing left by stickers?

Have you ever been troubled by the offset printing remaining on the furniture while tearing off the brand of new furniture? It can't be scratched or wiped off, so what should I do?

Self-adhesive, transparent glue, and various tapes bring convenience to our lives, but they also bring offset printing that is difficult to remove!

Don’t worry, Mido.com has compiled a few tips for removing offset printing. I believe that after you try these tips, they will be helpful to you!

1. Hair dryer

This method is suitable for offset printing on plastic products. Use the hot setting of a hair dryer to blow the offset printing to heat, and then slowly tear off the trademark.

2. Eraser

Use an eraser to wipe the offset printing. This method is very effective. If the offset printing is large, you need a little patience.

3. Fresh lemon juice

For offset printing that accidentally gets on the skin, you can gently wipe it with fresh lemon or lemon juice. Mido.com reminds you that the skin after wiping it with lemon juice must be rinsed with water to prevent sensitive skin from being burned by the high-purity lemon juice.

4. Hand cream

Hand cream contains a certain amount of surfactants, which is very effective for some high-end leather products! It can effectively remove offset marks without damaging your valuable leather goods.

5. Nail nail remover, medical alcohol, gasoline

For offset printing on hard vessels such as stainless steel or porcelain, we can use non-oily nail polish remover and alcohol to wipe it. Gasoline is also a good choice.

6. Fengyoujing

Soak the offset printing with cool oil, then wipe it with cotton cloth and it’s OK!