Current location - Trademark Inquiry Complete Network - Trademark inquiry - Gongtie labeling machine
Gongtie labeling machine
Look at a bag. The transparent paper of genuine cigarette sticks is flat, and the lap is ironed with a soldering iron, which is smooth and bright; The strip package is sealed by mechanical point bonding. Fake strips and bags are often packed with inferior old products, which are uneven, smooth and flat; Lapping and sealing are mostly bonded by glue; The bag is loosely packed and feels uneven. Second, look at the cigarette case. The cigarette case of real cigarettes is packed with transparent paper, and the pull head of the cable is in the shape of a small table, and the bonding is firm and flat. The transparent paper of fake cigarettes is uneven and loose, and the zipper is generally flat-headed, mostly without lead; The drawstring and the transparent paper are not bonded; The transparent paper of cigarette case is uneven after opening. Third, look at the trademark. The trademarks of real cigarette sticks and cigarette packs are consistent, and the patterns and handwriting are clear; The fake cigarette patterns are printed roughly, with different colors, unclear handwriting, incomplete letters, and errors and omissions in Chinese Pinyin and English. Fourth, look at flowers. Real cigarette mouth flowers are generally printed with the same manufacturer name as strips and boxes, and the width is the same. The joint is a joint of two thin strips, which is easy to open and not easy to break. The mouth flower of fake cigarettes is different from the manufacturer's name on the strip and box, and the width is also different. Mouth flowers are sealed with glue or paste, so it is difficult to open them. Fifth, look at the eye of a needle. Pinholes are left by mechanical packaging of cigarettes. There are two slits at the four corners of the bottom of the horizontal packaging box, and the slit on the side that is vertically wrapped after opening is a pinhole. But there is no pinhole in the manual packaging of fake goods, and the traces of scissors are obvious. Sixth, look at cigarettes. Authentic brand filters are cut neatly, without stubble, with uniform cigarette thickness, moderate hardness, clear steel seal, machine number and month written, neat upper and lower positions, clean cigarette surface and smokeless cigarette ends; Fake cigarettes are the opposite. Seven, watch your mouth. The joints of real cigarettes are full and do not leak. Fake cigarettes generally have no filter paper, and the seams are loose and easy to leak. Eight look at tobacco. Real tobacco stems are few, and after puffing treatment, tobacco oil is moist and shiny. There are many stems in fake tobacco, and there is even a mixture in tobacco. This kind of tobacco is dull and blue-brown. Nine smells. Tobacco has a special natural flavor. If fake cigarettes are perfumed excessively or use inferior essence, they will smell unpleasant essence, or the fragrance will be dull. Ten experiences of burning and sucking. The real cigarette has pure fragrance, appropriate intensity, small irritation and comfortable aftertaste, and it does not automatically extinguish after lighting, and the ash is gray and not easy to scatter. Fake tobacco leaves are generally unfermented, with a spicy throat and an unpleasant aftertaste; After ignition, it is easy to extinguish, the ash is grayish black, and the ash explodes outward and is easy to fall. The other four identification methods 1 identify fake cigarettes from four aspects, commonly known as "fake cigarettes" and "fake cigarettes", which refer to fake cigarettes with certain popularity in the market. Counterfeiters take advantage of the market share, reputation, brand benefits and public recognition of brand-name cigarettes to make huge profits by manufacturing and selling fake cigarettes, which seriously damages the interests of consumers, affects the image of brand-name cigarettes in consumers' minds, and virtually restricts the development of cigarette enterprises. Therefore, it is particularly important to identify the authenticity of cigarettes. 1. Identify 1 from the outer packaging of cigarettes. Transparent paper packaging: the transparent paper packaging of real cigarettes and small boxes is neat and shiny, while the transparent paper of fake cigarettes has no luster. The position and direction of the cable should be consistent, and the unbonded part of the 5mm cable should be left at one end of the small transparent paper cable for the handle, and the cable head is horseshoe-shaped. Although there is a horseshoe-shaped mouth on the zipper of fake cigarettes, the incision is irregular. In addition, the bottom of the small box of transparent paper containing some cigarettes is sprayed with black ink spray code number, and only one spray code of each box of cigarettes is not repeated. Such as the old Baduo (yellow hard box) and Sun Island (red hard box) of Harbin Cigarette Factory. 2. Carton packaging: The carton should be square in appearance and firmly pasted. Machine-packed boxes are generally three-point glue (GDXl, GDX2), but no matter what form, the positions of glue points should be unified. In addition, the box plugs of BE packaging machine and GDX 1 packaging machine in Harbin Cigarette Factory are printed with steel numbers, indicating the year, month and station. Those who do not meet the above characteristics can generally be judged as fake cigarettes. 3. Small box packaging: small boxes of real cigarettes should be well sealed and square in appearance. Its packaging trademark printing requirements are strict, and each batch of trademark paper has the same color, clear printing and complete trademarks. There are strict regulations on the materials used, and at the same time, the printer, specifications and what type of machine to use are indicated. The packaging form of the small box should be the same as the design. The seam of the small box trademark paper of 6000 packaging and BE packaging machine is on the front of the main pattern, and the seam of the small box trademark paper of GDXl packaging machine is on the side of the main pattern. There are glue spots between cigarette aluminum paper and trademark paper of GDX2 hard box packaging machine. Such as: Laobaduo (yellow hard box), Harbin (yellow hard box) and Sun Island (red hard box) of Harbin Cigarette Factory. At the same time, the word "HY" on the label of flexible packaging cigarette case in Harbin Cigarette Factory is printed with anti-counterfeiting ink. The identification method is that the "HY" pattern gradually disappears after heating with a lighter, and the "HY" pattern is restored to its original state at room temperature. If it does not meet the above characteristics, it can generally be judged as fake cigarettes. 4. Packaging of aluminum foil: the specifications of aluminum foil should be the same as those used for packaging, such as150×1kloc-0/4 mm (length× height) for soft packaging and 155× 165438 for hard packaging. Harbin Cigarette Factory has the word "TOPQUALITY" in English on the top of the hard box cigarettes, which has a special font and is difficult to imitate. At the same time, the folding line of aluminum paper at the top of the hard box can be easily opened by consumers, and the cut of aluminum paper is even and stubble-free, which is not easy for fake cigarettes to do. Second, identify 1 from the cigarette package. Cigarette rolling materials should be consistent with genuine products (including cigarette paper, tipping paper, filter, etc.). ). Most cigarette paper of real cigarettes and tipping paper have anti-counterfeiting labels. For example, the words "Harbin" are printed on the tipping paper used for red ganoderma lucidum and Fan Jiang cigarettes in Harbin Tobacco Factory: the filters of Huangha and Red Sun Island are all acetate fiber filters, and if the cigarettes are found to be polypropylene fibers, they are fake cigarettes. 2. Appearance of cigarette: it should be rolled by machine, and the production shift codes, lettering, patterns and figures printed on the cigarette should be complete and consistent in shape, otherwise it should be fake cigarettes. Real cigarettes are full and elastic: fake cigarettes are soft and loose. Authentic cigarettes are cut evenly and completely, and the surface is smooth. The lap joint is a straight line with no pinch end; But most fake cigarettes are because of the high moisture content of cut tobacco. The rolled cigarette is too hard, with macula on the face and stubble on the mouth. Not round, rough surface, oblique lap and pinch end. Third, the identification of the appearance of cut tobacco. All brands of cut tobacco generally meet the standards of their corresponding grades. The real cut tobacco has an open package fragrance, and the mixed fragrance of natural and essence of cut tobacco is obviously soft and smells very comfortable. At the same time, the cut tobacco should be consistent with the type of cigarette, and the cut tobacco should be shiny and oily. For example, the cut tobacco of Red Sun Island is orange in color, bright in luster, oily and stemless. The fake cigarette has a single formula, high moisture content, and the gloss is very different from the real cigarette. The stalks in the cut tobacco do not swell, and there will be stalks and stalks stuck in the cut tobacco. It should also be noted that the cut tobacco in some fake cigarettes has been illegally treated, such as sulfur fumigation, hydrogen peroxide decoloration, etc., resulting in dark color, rough surface, and uncoordinated red, yellow and white advertisements. Four. Although various means have been exhausted for criminals who manufacture and sell fake cigarettes, due to the full fermentation and scientific formula of real tobacco leaves, the natural aroma of cut tobacco developed by different brands of cigarettes is consistent with the aroma of various flavors and fragrances added. And they all have their own unique tastes and their own consumer groups. Although some fake cigarettes have made great efforts in appearance, complex leaf formulas cannot be faked. According to the evaluation of experts in the industry, there are great differences between the smoking taste, aroma, strength and irritation of fake cigarettes and real cigarettes. Even consumers who regularly smoke a certain brand of cigarettes will be able to distinguish between true and false after evaluation. Fake cigarettes cannot imitate the smoking style characteristics of cigarettes. There is also the difference between the flammability of true and false smoke, that is, the real smoke has good flammability, and it is still burning after ignition, and the real smoke does not turn off; On the one hand, the proportion of chlorine and potassium contained in cut tobacco is not harmonious, which affects the combustibility of cigarettes; On the other hand, because the stems in fake cigarettes are not puffed, there are stems and stems inside, which often leads to flameout.